PDA

View Full Version : Which hose to which place?????



InfernoM3
04-05-2005, 12:52 AM
Hi I was trying to replace a vacuum line on the bottom of my intake manifold. Only to find out there are 2 vacuum lines and now I"m not quite sure if i connected everything right?

here is a picture of the bottom of the intake manifold.

As you can see there are 2 lines, each pointing to two nipple/connecters on the manifold.

red line/ hose #1 I connected to L-shaped air valve near Air Flow Sensor.
http://www.realoem.com/bmw/showparts.do?model=HD13&mospid=47408&prod=19890500&btnr=13_0167&hg=13&fg=15
I believe this is hose part 10 to valve 13

blue line/ hose #2 I connected to FPR.

Please verify if I connected these correctly.

Bill R.
04-05-2005, 08:20 AM
manifold vacum and will give the same reading anyway.







Hi I was trying to replace a vacuum line on the bottom of my intake manifold. Only to find out there are 2 vacuum lines and now I"m not quite sure if i connected everything right?

here is a picture of the bottom of the intake manifold.

As you can see there are 2 lines, each pointing to two nipple/connecters on the manifold.

red line/ hose #1 I connected to L-shaped air valve near Air Flow Sensor.
http://www.realoem.com/bmw/showparts.do?model=HD13&mospid=47408&prod=19890500&btnr=13_0167&hg=13&fg=15
I believe this is hose part 10 to valve 13

blue line/ hose #2 I connected to FPR.

Please verify if I connected these correctly.