baileydog
04-23-2005, 10:13 PM
Hi Guys.. I had a driveline vibration that led me to think that the flex-disc was hooped ( quite cracked to look at it) My local mechanic removed the driveshaft to inspect it and replace the flex-disc, which actually did not look all that bad, but we replaced it anyway. What we did find was a very loose bearing or seal in the output shaft, it had a good 1/16" of play.
My question is whether anyone has pulled out the flange assembly from the end of the tranny (5 speed auto) and replaced the bearing etc.
I have checked the archives and Bruno's site and nothing seems to surface.
Thanks...
My question is whether anyone has pulled out the flange assembly from the end of the tranny (5 speed auto) and replaced the bearing etc.
I have checked the archives and Bruno's site and nothing seems to surface.
Thanks...