WTB m30 b35 head

[Gene in NC]

m30 b35 head added to m30 b34 e28 engine gives me what part of the 208 hp of the b35?

[632 Regal]

good question, your not going to get a text book answer unless that head went on the b34 normally. are there differences in valve sizes and compression chamber volume?

[Bruno]

m30 b35 head added to m30 b34 e28 engine gives me what part of the 208 hp of the b35?

If I can't sell my engines, I will part them out and you can have the head.

[mikey535im]

Bruno,
If you part the engines and the check valves are good in the oil filter housing , I could use a replacement. Let me know!
Mine is a weekend driver and when I first start it it takes about 5 sec. for the light to go out and at that exact moment the 'check control/oil pressure / consult manual' warnings come up . Yet for that entire day any restarts do not bring up this warning.
Do i need one?
Many Thanks,
Mike

[Gene in NC]

Mike, oil pressure sensor may be gunked up. That was the case with mine. THick gunk in it on removal. Replaced sensor (cheap from Advance or the like). Problem solved.