lowering springs

[Rory535i]

does anyone make springs for E34's that go lower than 50mm? not looking for ppl's opinions on the matter, just wondering if they're available. thanks.

[BigKriss]

does anyone make springs for E34's that go lower than 50mm? not looking for ppl's opinions on the matter, just wondering if they're available. thanks.

i think Kmac to any ride height, its around aus$450 front and rear

[brodee]

won't coilovers go lower than 2"?

[Rory535i]

won't coilovers go lower than 2"?

yeah but i'm just finding out about coil springs on their own.

[Kai@e34.de]

does anyone make springs for E34's that go lower than 50mm? not looking for ppl's opinions on the matter, just wondering if they're available. thanks.
sure :D

http://www.e34.de/pics/kai/karre/FW2.jpg

[Rory535i]

are you for real!? more details please! lol

[Kai@e34.de]

~90mm lower at the front and 30mm at the rear, official 75/40mm, www.reuter-motorsport.de

but not very pleasant to drive :)

http://www.e34.de/pics/kai/karre/DSCN0219k.jpg

[Rory535i]

that's great, thanks. what page is it on?

[Kai@e34.de]

http://www.reuter-motorsport.de/_katalog2005/s_16_federn_b.pdf

[pmlmotorsports]

does anyone make springs for E34's that go lower than 50mm? not looking for ppl's opinions on the matter, just wondering if they're available. thanks.

Why not simply cuts your current springs? Obviously you are not concerned with damaging the car's chassis, it's suspension components, or the possibility of losing control due to steering component failure, so please be somewhat considerate of public safety, and don't remove 98% of your cars suspension travel. Ever consider why you are having a hard time locating springs that offer such a tremendous drop? BECAUSE IT'S DANGEROUS AND THERE IS NO MARKET FOR SUCH A PRODUCT.

[Rory535i]

thanks for your opinion even though it wasn't asked for. my car is already lowered 50mm for over a year now and it drives fine with no damage to any suspension or steering components. no need to be a dick

[632 Regal]

I never measured but the BMA springs went pretty low...its low in my sig with H&R and the bma springs were about an inch lower both front and back...Im sure that dont help you much tho.

[liquidtiger720]

BMA springs or Bav auto springs? I wasnt aware BMA made springs.

[632 Regal]

duhhhh bav auto....still sleeping

[Rory535i]

I never measured but the BMA springs went pretty low...its low in my sig with H&R and the bma springs were about an inch lower both front and back...Im sure that dont help you much tho.

thanks jeff. yeah your car is low alright. how on earth could it be an inch lower with the bav auto springs!?

[Kalevera]

Haha...That's great Jeff :)

Rory -- I'm not trying to be a dick here, but how on earth does the car not scrape when going over bumps? I ran the bavautos for a while and they were a nightmare with the utterly slammed front end. I have to agree with Peter on this one. Seems like a really big compromise.

best, whit

[Rory535i]

Haha...That's great Jeff :)

Rory -- I'm not trying to be a dick here, but how on earth does the car not scrape when going over bumps? I ran the bavautos for a while and they were a nightmare with the utterly slammed front end. I have to agree with Peter on this one. Seems like a really big compromise.

best, whit

The only time the car ever scrapes is going over huge bumps in like a car park or something. this has only ever happened to me once. an extra 20 mm on top of what i have isn't gonna bother me. the roads here are dead smooth and speed bumps are non existant. i want my wheel-arch gap to look like jeff's! anyway i don't want this to turn into a full on debate like most threads do.

[uscharalph]

Too Late.