PDA

View Full Version : Dinan or M-tech



Ted K
07-20-2005, 11:25 PM
Looking at a couple of spring ideas. What would you chose between these too

BigKriss
07-20-2005, 11:33 PM
mtech proabably cheaper and you don't want too much drop. I would choose those.

pundit
07-21-2005, 05:52 AM
Looking at a couple of spring ideas. What would you chose between these too
As Kriss said the M-Tech will probably be a bit cheaper especially if you can source the parts s/h and it will just drop it slightly and tighten things up just nicely without being too uncomfortable. Make sure to try and get the sway bars as well. Anything more and the ride will noticeably suffer. It just depends on the compromise your prepared to accept.

granit_silber
07-21-2005, 11:40 AM
Looking at a couple of spring ideas. What would you chose between these too

I was told that the M5 springs will actually raise the front of a non-M e34, because the S engine weighs more than the M30.

-ashley

Ted K
07-21-2005, 12:39 PM
I dont want to make things any higher. Does anyone know the height difference between the two

TheDuke
07-22-2005, 08:56 PM
Any good places where I can find them?

Paul in NZ
07-22-2005, 09:05 PM
mtech doesnt mean m5 springs

granit_silber
07-22-2005, 09:52 PM
mtech doesnt mean m5 springs

But you wouldn't put springs designed to hold the weigh of an M3 on a heaiver M5.
So in this case M-Tech should = M5.

-ashley

Rory535i
07-22-2005, 09:56 PM
But you wouldn't put springs designed to hold the weigh of an M3 on a heaiver M5.
So in this case M-Tech should = M5.

-ashley

u can get mtech springs out of a 535i sport...like paul's

Shaun
07-22-2005, 10:14 PM
But you wouldn't put springs designed to hold the weigh of an M3 on a heaiver M5.
So in this case M-Tech should = M5.

-ashley

The M-tech springs were an option on "Sport" models. They're applicapable to the whole range of E34's, except 530 and 540 according to the ETK.

M-tech Front Spring: 31 33 2 226 669
M-tech Rear Spring: 33 53 2 226 672 (seems odd, listed under REAR MTECHNIC SPRT SPRING STRUT. Also one listed under regular suspension with "sporty" option -

darron525
07-22-2005, 10:26 PM
But you wouldn't put springs designed to hold the weigh of an M3 on a heaiver M5.
So in this case M-Tech should = M5.

-ashley

M-tech and M5 springs are two different things. The m-tech springs come on the 535 & 525 sport models which are more common in Europe.


darron