Race car finished the Pictures

[Bruno]

http://www.bmwe34.net/ebay/racedone0.jpg
This was the work in progress before all the work that has been done to the car

http://www.bmwe34.net/ebay/racedone.jpg
Pictures of the car with the company decals

http://www.bmwe34.net/ebay/racedone2.jpg

http://www.bmwe34.net/ebay/racedone3.jpg
This was a day at the track to rank up the miles on the engine

Race car specs as for now:
- Used '92 325is
- 2.8 vanos race prepared engine with titanium retainers and M3 cams
- M3 injectors
- OBDI M50 intake manifold and harness
- UUC underdrive pulleys.
- OBDI conversion with vanos
- SS clutch line
- lightweight flywheel
- Ireland engineering headers
- Clutch + M3 slave
- M3 short shifter and delrin bushings
- urethane engine and transmission mounts
- custom CAI
- Cat removal and O2 relocation
- Borla Stainless steel racing exhaust with Magnaflow resonator
- Custom 6 points roll cage
- 5 Point harness
- 2 x racing seats
- M3 control arms + solid offset delrin control arm bushings
- M3 front spindle and brakes
- Modified rear callipers and E46 vented discs
- Custom strut brace
- BMW X brace
- Mintex full race compound brake pads
- Ground control racing suspension
- UUC sway bars front and rear
- Rear adjustable control arms for negative camber
- 17" rims with R compound tires
- Paint Job inside and outside
- Steering wheel with momo hub and quick disconnect
- ARP DTM wing

[grave77]

wow...interesting, whats the hourse power achived? nice work Bruno! :)

[Bruno]

We are working with Mark on the Dyno, so far we are around 275Hp at the crank

[ScottyWM]

That's what I need to do to my E36!!!

[Jason]

.

[grave77]

thats cool ... will you be able to get that power to the wheels? also any ideas about supercharging the engine? I think from what I read this power is only from camshafts and intakes ture?