Ok, im stupid - euro ellips

[liquidtiger720]

So, I bought some euro ellipsoids that I thought were a good deal. But you know what. I just remembered, I need to rewire my headlights with h1 connections!

Anybody have a clue how I can change my stock 9006's to h1's? I can't find any of the links =x.

[Strap]

If you have 4 female spade connectors and some heat shrink you can change them easy, the factory wires are held buy a clip in the end of the plugs ( 9006 ) on the low beams, just pop off the clip take out the 2 wires and cut them or dont take them apart at all and cut them about 3 inches from the plug ( so you can re attach them later if you want ) and just put on the 2 female spade ( blue spades 16 gauge ) connectors .
Hope this helps

[Paul in NZ]

one of those wires goes to the bulb itself and the other to a spade connector on the housing the bulb clips into

[632 Regal]

here you go

http://www.realoem.com/bmw/showparts.do?model=HE12&mospid=47381&btnr=61_0543&hg=61&fg=15

I went through this and none of these are a perfect connector because of the design. I spent a while looking through here, maybe something will work for the headlights, didnt get it exact for the elipsoid fogs.

[brodee]

I bought new connectors and the wire leads from the dealer. The leads snap into the connectors and then you splice them into your current wires.

[632 Regal]

when I did the fogs, I had to special order 3 different part numbers and guess what would fit...none were perfect.


I bought new connectors and the wire leads from the dealer. The leads snap into the connectors and then you splice them into your current wires.

[liquidtiger720]

Thanks for the help guys. I finally found that website with those p'n. Thanks scDavid for that.

http://www.m3bmw.com/e34/

Does it look right?

LOW BEAMS: (Need Two H1 Bulbs)
Low Beam Caps: 63-12-1-378-333, 2 needed- ($18.50/ each)
Yellow Connector Terminal Plugs: 61-13-1-378-419, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

HIGH BEAMS: (Need Two H1 Bulbs)
High Beam Caps: 63-12-1-378-367, 2 needed- ($18.50/ each)
White Terminal Plug Connectors: 61-13-1-378-417, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

CITY LIGHT SOCKETS: (AKA "E.T. Fingers" :)
City Light Socket Housing: 63-12-1-378-334, 2 needed- ($9.90/ each)
Grey Terminal Plug Connector: 61-13-1-378-402, 2 needed- ($1.45/ each)
Wiring Cables 61-13-0-007-441, 4 needed- ($3.00/ each)


Minus the housings -which should have came with the euro ellips.


Brodee- did you order your euro ellips from that place already?

[brodee]

Brodee- did you order your euro ellips from that place already?

Not yet, have to wait until next week. Yours didn't come with the caps that go over the bulb??

[liquidtiger720]

Not yet, have to wait until next week. Yours didn't come with the caps that go over the bulb??
Haven't recieved them yet, they should be here on tuesday.

[bahnstormer]

if u go to teh dealer they have a generic plug that they use...
i just filed that down some and it fits the h1 slot on the lights perfectly
then the ends i snipped off the 9006 harness on the car and joined the
wires....

now though all my hard work went to waste since i got hids and the wires
plug right into the ballast =]

[632 Regal]

But look at all the fun and practice you had!

:D

[BMWE34M5]

We have all the OEM plugs/connectors/wiring for the conversion in stock.
E-mail me privately:
mel@abrahamsmotorsport.com


LOW BEAMS: (Need Two H1 Bulbs)
Low Beam Caps: 63-12-1-378-333, 2 needed- ($18.50/ each)
Yellow Connector Terminal Plugs: 61-13-1-378-419, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

HIGH BEAMS: (Need Two H1 Bulbs)
High Beam Caps: 63-12-1-378-367, 2 needed- ($18.50/ each)
White Terminal Plug Connectors: 61-13-1-378-417, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

CITY LIGHT SOCKETS: (AKA "E.T. Fingers"
City Light Socket Housing: 63-12-1-378-334, 2 needed- ($9.90/ each)
Grey Terminal Plug Connector: 61-13-1-378-402, 2 needed- ($1.45/ each)
Wiring Cables 61-13-0-007-441, 4 needed- ($3.00/ each)

[Johntee540]

Thats what I did too. hooked up the city lights too- JT

[MTechnik540i]

So, I bought some euro ellipsoids that I thought were a good deal. But you know what. I just remembered, I need to rewire my headlights with h1 connections!

Anybody have a clue how I can change my stock 9006's to h1's? I can't find any of the links =x.


Umnitza sells PnP(Plug and Play) connectors that work for 9005/9006 when connecting to H1. Pretty good quality, get the job done.

http://www.umnitza.com/product_info.php?cPath=101_24_35_46&products_id=34

I believe these would work, but you may try getting ahold of Matt at Umnitza before you order.

[joreb0]

So, I bought some euro ellipsoids that I thought were a good deal. But you know what. I just remembered, I need to rewire my headlights with h1 connections!

Anybody have a clue how I can change my stock 9006's to h1's? I can't find any of the links =x.


Before you snip those stock 9006's try doing this (see pics) first. Enlarge the holes to make it fit the H1 round prongs. Do not overdo it. You want it to have a tight fit.

[uscharalph]

Great Pictures. I've read that advice before "Enlarge the holes to make it fit the H1 round prongs.", but I've had a hard time really visualizing it. Not so now! Thanks!

[liquidtiger720]

Before you snip those stock 9006's try doing this (see pics) first. Enlarge the holes to make it fit the H1 round prongs. Do not overdo it. You want it to have a tight fit.



Awsome, Thank you very much. I may give that a try.

Are you on bf.c ? I swear, I just read that yesterday on bf.c somewhere.

[Don McAdams]

http://e30m3therealm3.com/e34/e34ellips.jpg


We have all the OEM plugs/connectors/wiring for the conversion in stock.
E-mail me privately:
mel@abrahamsmotorsport.com


LOW BEAMS: (Need Two H1 Bulbs)
Low Beam Caps: 63-12-1-378-333, 2 needed- ($18.50/ each)
Yellow Connector Terminal Plugs: 61-13-1-378-419, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

HIGH BEAMS: (Need Two H1 Bulbs)
High Beam Caps: 63-12-1-378-367, 2 needed- ($18.50/ each)
White Terminal Plug Connectors: 61-13-1-378-417, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

CITY LIGHT SOCKETS: (AKA "E.T. Fingers"
City Light Socket Housing: 63-12-1-378-334, 2 needed- ($9.90/ each)
Grey Terminal Plug Connector: 61-13-1-378-402, 2 needed- ($1.45/ each)
Wiring Cables 61-13-0-007-441, 4 needed- ($3.00/ each)

;)

[liquidtiger720]

;)


Is that your page? If so, thank you. :D