stacker wiring

[stx133]

for the OEM 6 disk stacker there is a luvly plug which attaches to the head unit, the Manual shows 10 wired connecting, not showing color or giving designation. have installed a new Blaupunkt head unit (1.5 hours and very nice) which has the ability to run a stacker. would like to find out if the stacker is compatable.

Further/ the original amp... do i remove or leave in.....the head unit is 40x4 output and the speakers i am about to install have individual crossovers which i can use if i remove the amp or not if i leave the amp in.

[stx133]

anyone????

[Dan in NZ]

I would doubt that your oem stacker can be controlled by the new headunit. If the plug is the same, you could always just give it a go, but I imagine the 10-pin rectangular plug is different...

[Strap]

if the factory was an alpine stock unit then you are not gonna be happy.
But if it was a bluapunkt head unit and factory changer then you can use a bluapunkt stacker or changer as i call it with a " handshake" cable about 50 usd at any good autosound store. factory changers and after market were changed slightly in the harness for dealer only prices.
Hope that helps

[stx133]

looks like the stacker is an alpine unit and there is no easy way forwards. The new head unit is MP3 compatable so i will pull the stacker out. A

Anyone want to but a 94 head unit and stacker. plugs included. sart the bidding.

[liquidtiger720]

looks like the stacker is an alpine unit and there is no easy way forwards. The new head unit is MP3 compatable so i will pull the stacker out. A

Anyone want to but a 94 head unit and stacker. plugs included. sart the bidding.

I'd buy it, but you are toooooo far. Good luck!