M540I Sport!!!

[ArtemLepilov]

This car is listed in my TOWN. I want to take it for a test drive. I only wish I had $17k on me. I would buy it right away :( That is a sweet deal for it.


-Artem

Link: http://www.roadfly.com/bmw/classifieds/cars/detview.php?prevnextbuttons=allf&view=34446


Someone please run this VIN through carfax...

WBAHE532XSGA65527

[kyleN20]

would rather have kris (not sure of name) m5 with mint spare engine for 14k obo

[Scott H]

would want to bother with that!


This car is listed in my TOWN. I want to take it for a test drive. I only wish I had $17k on me. I would buy it right away :( That is a sweet deal for it.


-Artem

Link: http://www.roadfly.com/bmw/classifieds/cars/detview.php?prevnextbuttons=allf&view=34446


Someone please run this VIN through carfax...

WBAHE532XSGA65527

[Traian]

Forget Nikasil. Those cars rock!

[Scott H]

they rock you all the way to the bank.


Forget Nikasil. Those cars rock!

[ArtemLepilov]

Do BMWs still ofer the replacement engines for free or was that offer limited time?


-Artem

[Hypr5]

limited time.

but most likely if the nikisil hasn't caused a problem by now, it won't in the future.

[ra_pro]

limited time.

but most likely if the nikisil hasn't caused a problem by now, it won't in the future.

The gas being sold now is a lot less cleaner with a fraction of the sulphur it used to have in 1995 when the car came out. Consequently if the engine is still good there is little chance that it will be damaged in the future. To be on the safe side I would still recommend to do research find which gas is cleanest where you live and buy only that gas. In Canada I only buy from Sunoco which has supposedly the cleanest gas.

[onewhippedpuppy]

http://www.toptiergas.com/index.html

For the states at least, gasoline that meets higher standards in part developed by BMW. The only ones I buy from.

[Johntee540]

there is no more replacements! Get your hands on an Alusil replacement engine along with this car and you are fine. I have seen used Alusil Engines for between $2500-3500. - JT

[tim]

Damn. That looks sweet.

BTW, just because he's asking a number doesn't mean you have to pay it.

e.g.:
He say's he has blizzaks on the t-stars (I dunno, mebbe I'm oldschool but that seems like a waste), and the schnitzers come as well. Well, $12.5k is your opening bid, w/o schnitzers. He comes back at $15k. You say $13.5 take it or leave it. He say's ok, and when you go to give the check and get the title, I bet you can pick up the Schnitzers for nothing, because once he has sold the car- psychologically, his perception of the value of accessories drops real fast.

Nikasil is red herring, I agree. I think some other posters are going lightly over the rarity of this car. This is an extremely rare car, and very possibly the lowest mileage example available. In decent colors too. I think there only 250 or so real ones in the US. Alot of fakes too.

[Elekta]

http://www.roadfly.com/bmw/classifieds/cars/image.php?Id=34446&type=full

about this bumper: the center fins start right at the fog. I believe my bumper has a flat piece first then the fins. It looks like the fins spread wider on this one. Don't care if it's for any reason, I just like it better. Am I seeing things or are there fin replacements for my flat piece?

btw, on my 530 bumper, one side is flat and the other has a vent that cools the alternator/voltage regulator.

[Bill R.]

/
limited time.

but most likely if the nikisil hasn't caused a problem by now, it won't in the future.

[Bill R.]

.
The gas being sold now is a lot less cleaner with a fraction of the sulphur it used to have in 1995 when the car came out. Consequently if the engine is still good there is little chance that it will be damaged in the future. To be on the safe side I would still recommend to do research find which gas is cleanest where you live and buy only that gas. In Canada I only buy from Sunoco which has supposedly the cleanest gas.

[Bill R.]

nikasil block. Top tier is the level of detergents present to clean injectors.



http://www.toptiergas.com/index.html

For the states at least, gasoline that meets higher standards in part developed by BMW. The only ones I buy from.

[Scott H]

I see 51 11 2 230 403/404 look to be fin-like in the ETK
I see 51 11 2 232 631/632 are the ones use on the bumper on my M5 and they are flat

BUT......the bumper covers themselves have two different part numbers. One is probably for 540 stuff to hook up properly (ducting, etc) and the other for M5 stuff to hook up properly (ducting, etc). I CANNOT tell if the parts are interchangeable.




about this bumper: the center fins start right at the fog. I believe my bumper has a flat piece first then the fins. It looks like the fins spread wider on this one. Don't care if it's for any reason, I just like it better. Am I seeing things or are there fin replacements for my flat piece?

[kyleN20]

wouls still rather buy this M5, everyone tells me its super rare, one of two in the us in this color, plus a BRAND NEW engine to boot, all for 14k obo, m5 for me please

[Elekta]

I see 51 11 2 230 403/404 look to be fin-like in the ETK
I see 51 11 2 232 631/632 are the ones use on the bumper on my M5 and they are flat

BUT......the bumper covers themselves have two different part numbers. One is probably for 540 stuff to hook up properly (ducting, etc) and the other for M5 stuff to hook up properly (ducting, etc). I CANNOT tell if the parts are interchangeable.

That has me thinking about the M5 bumpers I am putting on my 3.0v8. If those fins are actually directing air somewhere, there's a good chance that will help me more than hurt me.

I have to act fast as they are almost ready to begin the paint process and two more pieces won't change anything.

I have to call Patrick today anyway.

thanks again, scott

[onewhippedpuppy]

I've never seen a bumper cover with the fins like that. Mine are still black, but have about half fins vs the flat plate that was there before.
http://img17.imageshack.us/img17/2416/66ti.jpg

Part #s from this link.
http://lennon.csufresno.edu/%7Ejag62/grille.html

[632 Regal]

Oh Bill, your still jealous cause Nikisil is faster and lighter than their Alusil counterparts...come true man!

[Elekta]

http://www.munichmotorworks.com/ebay/M5frontlow.jpg

this is what I have...see the flat covers left and right of the louvres?

and now look at this Mtec bumper....
http://img.photobucket.com/albums/v11/ggil-tx/m5401.jpg

Is that a wide greel thang?

[Elekta]

my bumper needs to look like this
http://www.touringklubben.com/majk_sanfridsson/P9173060.jpg

bitchin

[Scott H]

The only thing behind the flat pieces on the M5 is the tow hook on the one side......

Notice on the M5 between the ducts under the fog lights there is a recessed channel running across the bumper between them.....this is NOT present on the M540....interesting

Also Geoff important for your swap is the temp sensor goes behind the blank duct on the pass side.

I would actually think the parts are interchangeable so if they don't cost too much....probably worth a shot!

[Elekta]

the more I look at it the more it looks like a completely different bumper.

we need to email that seller and see if he has a pn# or a dealer sticker or something.