Shankster
01-05-2006, 04:03 PM
Need pictures of the electrical connectors in the passenger side engine bay from the front of the BPE (the black plastic wiring enclosure). I replaced the vc gaskets on the passenger side. Did not label all connectors. I have two connectors which I cannot figure out where they go.
Anyone with a 95 540i who can take some close up picts of the wiring from the front of the BPE and where they hook up to?
Car starts and runs just fine. No CEL, no codes. I'm not sure whether these may be for ASC (which I don't have).
I'll try to borrow a digi cam and get some pictures of these and also the MK MK2 wheels. Couple of people had asked for pics of those.
Sid
Anyone with a 95 540i who can take some close up picts of the wiring from the front of the BPE and where they hook up to?
Car starts and runs just fine. No CEL, no codes. I'm not sure whether these may be for ASC (which I don't have).
I'll try to borrow a digi cam and get some pictures of these and also the MK MK2 wheels. Couple of people had asked for pics of those.
Sid