PDA

View Full Version : Emission Test & EAT Chip



Daskoff
03-12-2004, 02:00 PM
Well, I went to get my emission test today (Chicago) and I was a little worried about passing. I read some posts here about difficulty passing the emission test if you have an EAT or other type of chip. So I followed the instructions per Mark (EAT chip guy) and made sure the car was at normal operating temp. Then I went to the test. Here are the results:

HC - Hydrocarbons - Composite Fast Pass limit is 0.124, my reading is 0.011.
CO - Carbon Monoxide - Composite Fast Pass limit is 0.693, my reading is 0.247. Passed emissions test no problem.

Keep in mind that in Chicago if your car is not ODBII (basically post-96) they then test your car on a suedo-dyno (i.e. rolling test).

My car: 1990 535i manual, completely stock except for the EAT chip. 125,000 miles. Daily driver giving me 17 mpg in city driving.

Hey Mark - thanks for the great chip. And gas prices be damned, I'm keeping my chip and enjoying the power.

Adrian

gordon
03-13-2004, 06:40 AM
Happened to have my test results sitting here... knowing government standards...am sure U.S. and Can have some different measurments/requirements...

On Dyno at 40 kph .....................................At Idle
HC ppm ... Limit: 67 ... my reading: 32 ........Limit: 200.....mine: 19
CO% .... Limit: 0.37 .. my reading: 0.06......Limit: 1 ...mine: .01
NO ppm ... Limit: 0750 .. my reading: 74

Gas Cap Pressure Test: Pass
Fuel filler integrity Test: Pass

http://vaxxine.com/gblawson/vcs03.jpg