View Full Version : VIN Confusion.
NovceGuru
01-18-2006, 11:08 PM
Alright, so somebody posted a link for a free VIN lookup, which struck my curiosity. I copied down my VIN and came inside to check it out, well it appears the site no longer works. I did a forum search and came across http://www.bmw-z1.com/VIN/VINdecode-e.cgi This site says my car was manufactured in 11/1992 and that I have an M50B25 which from what I’ve read....is the non vanos engine? Now when I did my cam chain I know for a fact I inspected the vanos hydraulic unit...any ideas? Thanks
NovceGuru
shogun
01-19-2006, 12:07 AM
Is the VIN from the car's VIN plate or from your registration?
Different numbers/typo?
Can you give us the last 7 numbers of the VIN?
Kalevera
01-19-2006, 02:19 AM
9/92 was the M50TU introduction date on the E34. So an 11/92 car will have vanos.
best, whit
NovceGuru
01-19-2006, 11:10 AM
9/92 was the M50TU introduction date on the E34. So an 11/92 car will have vanos.
best, whit
well lowell seems to have cleared up my question, I just don't know why the VIN wouldn't report the correct engine, my VIN is WBAH0631XPBJ86771* If somebody wanted to run a carfax for me that would be great :)
DaCan23
01-19-2006, 12:16 PM
From my engine master doc
M50B25 2.5L I-6 1990-1995 2494cc 189 bhp 181 ft-lbs DOHC/VANOS 228 24 33 mm 30.5 mm 84 mm 75 mm 10.5:1 Bosch Motronic DME 3.3.1
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.