clutch rattle / part number

[wang540]

1)What would be the possible cause of a rattle that goes away when the clutch is pushed in?

2)Theres a large plastic hose that is curved that goes into the air filter and no matter how hard i try i can not find it on part sites i was wondering if someone can give me the name or part number. I'll provide a picture if needed.

Thank you.

[rob101]

I think no. 1 is a frigged throw out bearing, and for no. 2 a picture is needed.

[632 Regal]

did you look up #2 on realoem?

[rob101]

did you look up #2 on realoem?
some times finding the vacuum hoses can be retarded on realoem, i found my ICV and associated hoses for my e28 in the cooling hoses section!!!

[wang540]

I tried to find it on both BMA and realoem. I was looking for it by picture because i don't know what its called. I'll put up a picture ASAP.

Thanks

[Kalevera]

The source of the noise has to be more specifically located. It could be dual mass rattle, it could be bad layshaft bearings. Depends on where it's coming from.

best, whit