View Full Version : Sagging headliner tips?
shelldrake
04-01-2006, 06:29 PM
95 525i, 140k.
Headliner is starting to sag, about 1 sq ft on the drivers side all the way to the rear, near the rear glass. I notice it blowing around a bit with the windows down. I'd like to take care fo this before it gets worse.
Thanks for the help.
Alexlind123
04-01-2006, 06:39 PM
http://www.bimmerboard.com/forums/posts/143565/
http://www.wlsheadliners.com/tutorials/bmw/
Some people have also had some success with lifting the back enar the glass and spraying some adhesive in.
shogun
04-01-2006, 06:53 PM
Just look on my website.
Kalevera
04-01-2006, 07:11 PM
I think you'll have limited success regluing a sagging headliner. The adhesive separates and turns to dust between the backing board and the material, making it a difficult proposition.
My long term solution: bought a complete headliner from a '95 525 parts car. Removed from the parts car and installed it in my car myself (it'd be hard to ship a headliner with backing board), looks great, and should be fine for another five years or so.
One thing that was suggested to me back when I was considering possible solutions was to use those chevy-esque fabric "buttons"....make that ride look more luxurious in a cadillac sort of way...oh yeah. Pins would also do the trick.
best, whit
Randell
04-01-2006, 07:31 PM
same thing happened to me this summer just gone... it went from a tiny patch of sag in the right-rear corner to basically half the fricken roof hanging down! i didn't wanna let it go all the way, i've been in an E36 where it sat on ours heads and was like a tent...
soo... without $1000 to spend getting it redone and without the skills to reapply a new one myself, i bought a can of craft glue spray, ripped the nozzle off and stuck the nozzle from a can of WD-40, then poked holes in the headliner (5, across the back where the concave is) and stuck the little nozzle hose in there and filled it with glue
the adhesive that's in there is all flaky and makes it a pain in the ass to stick up, but it's been 3 months and it's still ok... it's a bit messy looking, but it's in the concave you don't really see it... better than having a tent!
Javier
04-01-2006, 08:20 PM
My question would be:
Were do I can get in USA the foamy backed fabric and the not foamy backed same fabric, as for the front/rear pillar, I need same fabric without foamy cushion.
Javier
Alexlind123
04-01-2006, 08:23 PM
You might be able to shop around at fabric shops to see if they can match the color. Otherwise, you might try using the foam backed stuff, theres a small chance it might fit.
Booster
04-01-2006, 09:08 PM
Headliner fabric is inexpensive per yard at wholesale fabric suppliers. Many,many colors to choose from.
In all reality.....fix it once right to last another 13 years.Pull the roof card and strip it clean.Recover it with the aftermarket cloth/foam material and be done with it.
Or........whine as you right the check to your choice of automotive upholstery shop for 250-450.00$ instead of 45.00$ anda can of Super 77 spray glue !;)
Cheers,Vincent
shogun
04-02-2006, 12:02 AM
http://www.worlduph.com/bmw13.htm
it is not that difficult.
Paul in NZ
04-02-2006, 12:14 AM
how come there isnt any headliner material for the e 34???.I need to do mine soon
shogun
04-02-2006, 12:29 AM
I ordered my one from here in Germany
http://www.mah.de/
Sent them a sample. Comes per meter and the width is - as far as I remember- about 140 cms. So 2 meters will be completely enough. The headliner has foam, the A/B/C pillar material has no foam.
You should use 1/8 inch headliner material and NOT 1/4 inch. WLS in USA sells 1/4 inch for E32. 1/4 inch material will not fit contours of roof grab handles, and other recessed areas of Headliner, and the sunroof panel will bind and stick with 1/4 inch material because there is not enough clearance. Most European cars use 1/8 inch.
check with them if they have an agent / distributor in your country.
shogun
04-02-2006, 04:13 AM
I just remember this posting, maybe you send him an email, in his profile also a phone number is shown
http://www.bimmer.info/forum/showthread.php?t=13968
Elekta
04-02-2006, 01:40 PM
I was thinking I'd do my rear touring headliner in vinyl for those days when the dog goes swimming. He's the one that made it release itself anyway. Might as well tailor the next one for him.
Alexlind123
04-02-2006, 01:49 PM
What kind of dog do you have?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.