Is this an LKM issue?

[///Mink]

I had a weird issue today, thought maybe one of you could clarify if this is or is not a possible LKM resolder issue.

As I was driving around today, I got a "F/Fog Lamp" error. However, I didn't have the lights on at the time! Furthermore, after I stopped, I turned the lights on and checked - everything worked just fine. Turned off the key, restarted, and the problem was gone.

Any ideas?

[Blitzkrieg Bob]

dirty or loose conections.

Take a look at all the fog light plugs, and clean them, then check the CCM to see if it is in good.

[shogun]

Do you have an LKM-B or an LKM-L.
The B only can check all bulbs when they are on, the L also checks for faulty bulbs when lights are off.
But I assume that it is as Bob says above.
Clean all contacts with emery paper, tighten the bulb holder connections.

[Mitch90535im]

My "LKM issue" showed up with low-beams going out while driving. Cracked solder that you could clearly see with the help of a magnifing glass. Used solder wick and a gun to remove old solder, re-soldered and they've been fine ever since.

[rps1072]

I was having this problem a while ago.
http://www.bimmer.info/forum/showthread.php?t=12023

It was the main grounding wire on the left side of the engine.