PDA

View Full Version : ebay.de - e32 four piston calipers for sale.



BigKriss
04-25-2006, 03:54 AM
http://cgi.ebay.de/BMW-4-Kolben-Sportbremse-aus-750i-750iL-E32-850i-E31_W0QQitemZ8058082103QQcategoryZ61967QQrdZ1QQcmd ZViewItem

http://www.gregor-weiss.homepage.t-online.de/Brems1.jpg

Offer an original BMW 4-Kolben high speed brake assembly from a 1991er BMW 750i E32 (twelve-cylinder). The connoisseurs in the scene surely know that this brake with small structural alteration measures to many BMWS of models (E32, E34, E31, E28, E24 etc..) fits. Ideally with increases in output! Super of delay values (stops the 2 tons heavy 750iL) and payable wearing parts, there everything (disks, linings, sealing sets of etc..) at the BMW partial bar is available. Scope of supply: Both brake calipers with in each case 4 pistons, wind guide plates for the hinged supports (to the cooling) as well as the screw connection for the saddles (not in picture). I do not offer used disks and linings expressly also - I assume here only solvent BMW drivers offer, who can afford also a sentence new brake disks and linings. Condition: Fully functional condition, piston not firmly - brake was tested to 15.04.06 with development. Without optical Aufgemotze (new lacquer) one did - this is left to the buyer. Ebay fees like always I carry, for much fun when offering. Exclusion of the new BGB changes of law of contract with my Aukionen: I.e. there are no warranty claims.

Johntee540
04-25-2006, 05:56 PM
Those look really rough! - JT

pundit
04-25-2006, 05:59 PM
Those look really rough! - JT
I'd be expecting a full re-kit (including a complete set of new pistons!)
I be first checking availablity and price of new pistons before I bought them.
My other concern is how long have they been exposed, unsealed, to the elements? If the cylinder 'O' ring groove is corroded then they're probably boat anchors.

jjdickm
04-25-2006, 06:47 PM
how much is that in us dollars?

shogun
04-25-2006, 06:56 PM
http://www.oanda.com/ online converter

jjdickm
04-25-2006, 06:59 PM
thanks

BigKriss
04-25-2006, 10:09 PM
They do look rough, but caliper rebuild kits are available with new pistions and boots.

http://www.realoem.com/bmw/showparts.do?model=GC81&mospid=47354&btnr=34_0363&hg=34&fg=05&hl=19

Pad availability is low, but where else will you find cheaper four piston brakes. They accept 324x30mm rotors which I've heard fit under stock 15" wheels.

emw525E34
04-26-2006, 06:31 AM
Yeah Kris, really rough. To the extend that it may not be worth re-conditioning the thing. I would stay away. Stock calipers with good pads are the way to go. They are pretty well engineered in the first place.