PDA

View Full Version : Looking for new or rebuilt AC compressor.....



Bellicose Right Winger
05-15-2006, 06:49 PM
for '93 525i, Nippondenso 10PA17C. Any suggested suppliers and what's a reasonable price?

Paul Shovestul

MBXB
05-15-2006, 06:54 PM
10PA17C 150.00 with exchange.
The drier is 40.80.
Mark Irwin, Hancock Industries/Hodyon Corp.
1.800.289.8282 ext.488

Price was as of 3 weeks ago.

tim s
05-15-2006, 07:15 PM
for 100.00+22.00 shipping, so far so good. the only problem was the clutch wire had the wrong connector so i soldered the one from the old compressor on it.
tim s.

rps1072
05-16-2006, 10:15 AM
http://www.bostoncompressor.com/

You might try these guys. Very helpful when I replaced my clutch bearing.

MBXB
05-16-2006, 11:48 AM
Boston Compressor was bought by Hancock Industries/Hodyon.

Bellicose Right Winger
05-16-2006, 01:58 PM
Thanks a lot guys.

Paul Shovestul

Kalevera
05-16-2006, 08:16 PM
Stay away from the reman'd densos -- as denso doesn't make new replacement hard parts for their compressors, you're effectively getting a mish mash of used parts and new seals. Big risk to take in my book.


best, whit