PDA

View Full Version : anyone tried acrylic headlight lenses?



shogun
05-20-2006, 10:48 AM
A pair for $ 34.99 at the moment.
I do not need them, just interested if they are a good recommendation as replacment for the original glass lenes, considering the orice.
http://www.bmwlight.com/bmw_e34.htm

BillionPa
05-20-2006, 11:41 AM
if you break the glass, hell yes.

Alexlind123
05-20-2006, 01:07 PM
They will scratch more easily than glass, giving them a dulled appearance over time. Buy some of those protector thingys that you stick on the lens, and they should be great!

glocati
05-22-2006, 03:34 PM
They will scratch more easily than glass, giving them a dulled appearance over time. Buy some of those protector thingys that you stick on the lens, and they should be great!

I replaced both low-beam lenses 2 years ago, and they still look brand new. Frequent washing and occasional wax is only maint. i've done.

1991 525i Novs
10-24-2006, 11:09 PM
I replaced both low-beam lenses 2 years ago, and they still look brand new. Frequent washing and occasional wax is only maint. i've done.


I got a pair of euro smiley headlights, will these look the same?

CharlesAFerg
10-25-2006, 03:40 AM
I got a pair of euro smiley headlights, will these look the same?

No they won't. Click the link and look at the pictures dude...

http://www.bmwlight.com/images/outer_large_flip.gif

Qube
10-25-2006, 08:02 AM
I would guess in a few years, they'll probably start to yellow... if not made by a known manufacturer. Of course, I'd get them (if I didn't have halos)... just like I'd get a top notch Maaco paint job to get through the life of the car ;)

1991 525i Novs
10-30-2006, 06:56 PM
where can i get replacement glass from then, i got a pair of euro smiley headlights and need some replacement glass for the lens

Thayne
10-30-2006, 08:31 PM
I used them on my low beams and they look great. Haven't had any problems with them.

Macv
10-30-2006, 09:37 PM
Have them for my fogs and they're great. No complaints

DanQ
11-12-2006, 08:35 AM
I put these on my low beams about 2 years ago. The centers of the lenses are now pushed in as if someone heated them up and pressed the center.