PDA

View Full Version : code checking problem



brandini
06-05-2006, 04:03 PM
Hi all....before you say it I know...I know....put gas in the darn thing.....

Well I nearly* ran out of gas the other day in my 1993 525i touring...she sputtered and kicked as I was pulling into the gas station. In the process the check engine light came on.... I am having no problems (since the refuel) but the darn light won't go away. So I tried to check the codes today and was going to clear them afterward, though I'm getting no codes. I am turning the key to the #2 pos. pressing the acc. pedal 5 times within 5 seconds, the check engine light begins to blink....one long time and then a couple of short .5 sec. blinks then repeats but shows me no codes or the 1444 code to tell me there are not codes...am I doing something wrong? I won't this darn light to go away..

THanks for your help,
B- :)

BillionPa
06-05-2006, 10:44 PM
disconnect the batt for an hour?

brandini
06-06-2006, 04:29 AM
Im not sure if your asking or if your suggusting : ) I purchase the car about two months ago, the previous owner let it sit for about three weeks and the battery died?
so it was disconnected for a little while, or should I try disconnecting?

THanks,
B :)

Espen
06-06-2006, 04:37 AM
Try disconnect the battery it will clear all codes.

brandini
06-06-2006, 08:06 AM
I will try that! Thanks for the help.

B-