chicago directions

[632 Regal]

dont have a real map yet and since i could get lost backing out of my garage, what is the skyway called like as in numbers or road name?

AND where is Scotts directions to avoid the construction?

[Ross]

Jeff,
The skyway is interstate 90. I urge you to avoid it. Apparently you are coming from the east, use 80/94.
The route seems to be in debate from the east. There is construction on both routes. The skyway/Dan Ryan has lane closures in the late eve. and wee hours,sometimes one lane only open. The 80/94 route has become notorious because of a long reconstruction project. This is nearly complete.
I have had no major delays there recently nor have some friends who travel the route regularly.
If you refer to an old post of mine I suggested a route that I frequently use.
Either way you choose enjoy your trip and my city.

[632 Regal]

all points taken, thanks. What about during the daytime since thats when ill be cruisin? or the same?


Jeff,
The skyway is interstate 90. I urge you to avoid it. Apparently you are coming from the east, use 80/94.
The route seems to be in debate from the east. There is construction on both routes. The skyway/Dan Ryan has lane closures in the late eve. and wee hours,sometimes one lane only open. The 80/94 route has become notorious because of a long reconstruction project. This is nearly complete.
I have had no major delays there recently nor have some friends who travel the route regularly.
If you refer to an old post of mine I suggested a route that I frequently use.
Either way you choose enjoy your trip and my city.

[Ross]

My preference is 80/94 to 294n to 88w to 355n. Traffic in that area is F'd in general but the reconstructed 80/94 is much better than it's rep. Having said that I should add I haven't used the skyway in some time. The Dan Ryan is the bigger problem on that route. According to another post on this board it's not bad during the day.
I guess it's a crap shoot. You will get a brief glimpse of the tall builings from the 90 route. I personally hate that route if not for the congestion for rheer number of maniacs in beaters driving like they stole it, perhaps they have.

[Qube]

Well, on the other hand... Scott swears to take the I-90 instead...

[632 Regal]

link me?

Well, on the other hand... Scott swears to take the I-90 instead...

[Scott H]

but as I have stated before, your notes on these two routes are a little outdated...

I-90 (Dan Ryan Expy) *was* down to one lane while they were setting up for all the roadwork back in March/April. I used to leave work between 1am and 3am during tax season and witnessed no strange lane closures. I drive to work twice each week currently, and can say the same. Currently there are three lanes open in both directions *and*, more importantly, I-90 moves at a consistent pace. A slow moving freeway is always better than a stop and go freeway. Taking I-90 also takes everyone past the loop, and more importantly, leaves everyone less navigation to get to their ultimate destination, being 1) karting on Friday night (as you can take the I-94 split north of the city), or 2) Busse Woods on Saturday (as you can get off I-90 on arlington heights road and head south to higgins, take a right and you are there)

Google Maps (http://maps.google.com/maps?q=Elk+Grove+Village,+IL&ll=42.033612,-87.986069&spn=0.046411,0.099306&om=1)

I-80/I-94 project is not nearing an end, although relative to the total project timeline on the IL *and* IN sides, yes it is waning. The IL side is torn up for the open road tolling and I-294 interchange reconstruction which has caused some serious stopped traffic going in both directions. That whole area is also about 6 degrees warmer and shittier to be stuck in. I travel that path frequently to and from our summer home in Michigan. The only reason I deal with it is because I live 1 mile south of I-80 in Mokena. There is no better detour for me to get home. Also, taking 294 to 88 to 355 would only take you backwards on the 88 leg. Why wouldn't you take 294 to 290 to 355 which turns in to 53? These routes are just too much additional navigation for people unfamiliar with the area.



Jeff,
The skyway is interstate 90. I urge you to avoid it. Apparently you are coming from the east, use 80/94.
The route seems to be in debate from the east. There is construction on both routes. The skyway/Dan Ryan has lane closures in the late eve. and wee hours,sometimes one lane only open. The 80/94 route has become notorious because of a long reconstruction project. This is nearly complete.
I have had no major delays there recently nor have some friends who travel the route regularly.
If you refer to an old post of mine I suggested a route that I frequently use.
Either way you choose enjoy your trip and my city.

[winfred]

don't you have a computer?
http://members.cox.net/kitlou/map.jpg


dont have a real map yet and since i could get lost backing out of my garage

[632 Regal]

nope
don't you have a computer?]

[winfred]

U suck


nope

[Ross]

Tiff?

[632 Regal]

Tiff?
Tagged Image File Format (abbreviated TIFF) is a file format for mainly storing images, including photographs and line art. Originally created by the company Aldus, jointly with Microsoft, for use with PostScript printing, TIFF is a popular format for high color depth images, along with JPEG and PNG. TIFF format is widely supported by image-manipulation applications such as Photoshop by Adobe, GIMP, Ulead PhotoImpact and Paint Shop Pro by Jasc, by desktop publishing and page layout applications, such as QuarkXPress and Adobe InDesign, and by scanning, faxing, word processing, optical character recognition, and other applications. Adobe Systems, which acquired the PageMaker publishing program from Aldus, now controls the TIFF specification.

The phrase "Tagged Image File Format", or, actually, "Tag Image File Format", was used as a subtitle in some earlier versions of the TIFF specification. The current TIFF specification, TIFF 6.0, makes no mention of these phrases; the name is now, simply, "TIFF".

TIFF was originally created as an attempt to get desktop scanner vendors of the mid-1980's to agree on a common scanned image file format, rather than have each company promulgate its own proprietary format. In the beginning, TIFF was only a bilevel image format, since that was all that desktop scanners could handle. As scanners became more powerful, and as desktop computer disk space became more plentiful, TIFF grew to accommodate grayscale images, then color images.

I hope this is of some help.

[Scott H]

http://dictionary.reference.com/search?q=tiff


Tiff?