View Full Version : resonator delete?
goat128
07-27-2006, 07:52 PM
Hello! I have a question - if I delete the resonator what can I put in its place instead of straight pipes? For instance I've heard theres bullet resonators and x-pipes, will any of these help keep the noise down and provide better performance? Can they be combined in tandem?
What would the cost be like?
thanx :)
- 1994 530i -
gviloria99
07-27-2006, 08:19 PM
I removed the resonator and installed straight pipe, you can barely tell the difference. It is alittle louder when taking off.
BillionPa
07-27-2006, 09:18 PM
an x pipe is better for exhaust pressure equalization.
goat128
07-28-2006, 03:06 PM
Thanks for the info gviloria99 and BillionPa. So a good setup would be an x-pipe, no bullet resonators? Any more info?
gviloria99
07-29-2006, 01:07 AM
Don't need an x pipe, the exhaust meets up at the muffler. The x pipe only helps when installing true dual exhaust system, by that I mean you install 2 mufflers and 2 tailpipes.
goat128
07-31-2006, 05:05 PM
I would then need a y-pipe to run it into a bullet resonator, run single pipe to the muffler?
I'm starting to think stock setup is best, as I've read some complaints about straight pipes - raspiness, etc. Unless theres a better solution out there.
Full aftermarket exhaust, for instance the remus, looks like it has a fairly small resonator - but the downside is the cost.
goat128
07-31-2006, 11:07 PM
Ok, I got a plan
stock:
http://s28.photobucket.com/albums/c223/dskootsky/?action=view¤t=stock.jpg&refPage=&imgAnch=imgAnch2
modified:
http://s28.photobucket.com/albums/c223/dskootsky/?action=view¤t=modified.jpg&refPage=&imgAnch=imgAnch2
this way no y-joint will be required and I can continue to run twin pipes down to the muffler.
I'll update as more info becomes available.
shogun
07-31-2006, 11:55 PM
Here is some indea from an E32, I posted earlier this year, pics
http://www.bimmerboard.com/forums/posts/175183/
I had a heartge exhaust put on, and it wasn't loud enough so I went ahead and had streght pipes put in instead of the resonator, no power increase but it got a litte louder and introduced a tiny bit of raspyness but it sounds good, not ricy.
EDIT
Actually listn to my dyno video
Espen
08-01-2006, 05:18 AM
http://www.roadfly.com/bmw/gallery/photos/photos-06-2004/7-4762315.jpg
Would this setup fit an e34? It looks like the long straight pipes would interfeer with the left backwheel?
scyrusurcys
08-01-2006, 06:51 AM
Ok, I got a plan
stock:
http://s28.photobucket.com/albums/c223/dskootsky/?action=view¤t=stock.jpg&refPage=&imgAnch=imgAnch2
modified:
http://s28.photobucket.com/albums/c223/dskootsky/?action=view¤t=modified.jpg&refPage=&imgAnch=imgAnch2
Your modified version looks exactly like the stock setup of the E90. Correct me if I'm wrong on this.
goat128
08-09-2006, 05:09 PM
Ok I said I would update when I had the info :). I've been googling for weeks it seems.
http://www.insomniakz.com/images/random/magnaflow.jpg
Its a magnaflow universal resonator (though they call it a muffler). Here installed on an M3. Eliminates "raspyness" sound compared to straight-thru pipes. Heres the referring info:
http://www.m3forum.net/m3forum/printthread.php?t=66111&pp=40
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.