PDA

View Full Version : Head bolts M30 engine


Dash01
08-23-2006, 12:40 PM
When replacing the head on an M30 engine, how important is it to have NEW head bolts? The old ones look OK, and as long as the holes are clean and free of oil, is it OK to re-use the old bolts?

And, is Loctite suitable for use on the threads, or not?
632 Regal
08-23-2006, 01:03 PM
new bolts always, the old ones stretch to get the correct clamping forces and can snap when re-used. No loctite on these. Make sure the bolt holes are clean and dry.
Bill R.
08-23-2006, 04:16 PM
m60 which are torque to yield. For the m30 all you have to do is clean them up , inspect them and lightly oil the threads and the head of the bolt according to the service manual.




new bolts always, the old ones stretch to get the correct clamping forces and can snap when re-used. No loctite on these. Make sure the bolt holes are clean and dry.