M30 - Spark Plug Wire Resistance

[JMI]

I'm troubleshooting an idle problem and when testing the spark plug wire resistance get approximately 5700 t0 5900 ohms. Saw this post:

http://www.bimmer.info/forum/showpost.php?p=31253&postcount=7

Is this the real deal? My apologies to Bill R if they are.

Thanks

Jim

[winfred]

they are solid core wires with resisters built into the connectors so all of the wires will read real close to each other, you can ohm out the plugs too, you should get nothing to the ground and it can vary to the center electrode but you can cross check with the other plugs

[JMI]

See this (http://www.bimmer.info/forum/showthread.php?t=25309)