Torque Wrench Recommendations

[Alexlind123]

Can anyone reccomend a good 1/2'' drive torque wrench that will go up to 250ft lbs?

[winfred]

one of these (http://cgi.ebay.com/ebaymotors/S-K-Tools-1-2-dr-250-ft-lb-Torque-Wrench-74251_W0QQcmdZViewItemQQcategoryZ35625QQihZ020QQit emZ300026700145QQrdZ1QQsspagenameZWDVW) should do just fine (http://cgi.ebay.com/K-D-TOOLS-NAPA-MOD-2952-1-2-25-250-FT-LBS-TORQUE-WRENCH_W0QQitemZ190032807362QQihZ009QQcategoryZ422 65QQssPageNameZWDVWQQrdZ1QQcmdZViewItem) good name brand units

[yaofeng]

This is something you will be using for a long, long time so I'd not skimp it buying from those made in you know where. I have a 3/8" click type I bought cheap but I can no longer trust so it is never used nowadays. Although I think K-D and Mac are still too expensive. Craftsman is a good choice. If you are worried about precision, the beam type doesn't lose it. But is less convenient.

[632 Regal]

I bought a Cobalt or Kobalt brand at home depot, supposedly made by the same people as Snap-On