View Full Version : e39 5 series wheels on e34 5er?
fuzion
09-29-2006, 01:08 AM
possibly to fit or not?
thanks!
Espen
09-29-2006, 01:42 AM
SEARCH!
But yes they will fit OK, hubcentric rings are required.
pgrindstaff
09-29-2006, 07:05 AM
Yes, e39 wheels will fit an e34 with hubcentric rings from tirerack. Take a look at bmwe34.net (http://www.bmwe34.net/), there is plenty of info on this topic there, also, here (http://grindstaffp.googlepages.com/DSC01086.JPG) is a pic of my wheels.
-Patrick
No, they won't fit. But if you search, you'll know why.
Black 535i
09-29-2006, 10:46 AM
[...I have Style 33 wheels on mine with the rings.
DABLACK
09-29-2006, 11:08 AM
Gotta Use Da Ringzzzzzzzz
[...I have Style 33 wheels on mine with the rings.
Meh. Did we have to give away the secret of the 'rings' already? ;)
DABLACK
09-29-2006, 12:01 PM
Well you just dont walk into Mordor!
i thnk you'll need part # a670 from tirerack?? $20 shipped
am i correct?
Chipper
09-29-2006, 05:43 PM
I'm sure these are E39 wheels on my tourer, they where fitted by the previous owner but I recently had the wheels off to fit some new break pads and there wher no rings?
Excuse my ignorance but what do they look like?
Cheers
Blitzkrieg Bob
09-29-2006, 05:55 PM
You should be able to find them at a good tire shop.
Ooops I mean Tyre Shop
Chipper
09-29-2006, 05:58 PM
well they havn't fallen off and it drives OK, so i presume that they are fitted,
But just to be sure i'll check them out tomorrow
cheers
Blitzkrieg Bob
09-29-2006, 06:04 PM
you'd notice some vibration
SnakeyesTx
09-29-2006, 08:50 PM
Okay, while we're on the subject of rims here, I've got too ask. I saw the pictures of these "hubcentric rings" and have read several threads saying that you need them with certain rims.
What function do they serve? I've never had a vehicle that ever needed something like these before. Most of the time with my aftermarket rims, the hub cutout for them were always slightly bigger than the factory hub of the car. I've always assumed that the tapers in the lugs pull the wheel into a centered position. Coupled with proper balancing, I've never had an issue or vibration before.
I understand our lugs *are* the studs as well, but they're still tapered, so... what's the deal with the rings?
Blitzkrieg Bob
09-29-2006, 09:00 PM
http://www.miata.net/garage/hubcentric.html
Illustrate the use.
CharlesAFerg
09-29-2006, 09:14 PM
possibly to fit or not?
thanks!
nm.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.