Uber Soldat
10-20-2006, 11:46 AM
Hello again.
Finally got myself some electric seats from a junkyard.
The drivers seat had bad seat twist.
I also noticed that when i pushed the switch to lift the seat that it moved unevenly.
I ended up shortening all the plastic sheeths on both seats.
The leather on the electric seats was very bad, so decided to swap the leather from my current manual seats. Quite easy actually.
You'll notice in these photo's i took that my father and i had to weld the top of the drivers seat frame.
So if you do find electric seats that have the dreaded twist, i would definately check that the metal at the top is not torn.
http://img114.imageshack.us/img114/7346/pic3lv3.jpg
http://img407.imageshack.us/img407/5920/pic2tx4.jpg
http://img124.imageshack.us/img124/771/pic1qx1.jpg
Last but not least i managed to aquire a auto dimming mirror. Thanks to some posts found on this wonderful site, we managed to wire it up correctly,and now have a fully functioning mirror.
Thats all from me for now.
Will hopefully be putting in tweeter panels this weekend and a few other bits and pieces.
:D
Finally got myself some electric seats from a junkyard.
The drivers seat had bad seat twist.
I also noticed that when i pushed the switch to lift the seat that it moved unevenly.
I ended up shortening all the plastic sheeths on both seats.
The leather on the electric seats was very bad, so decided to swap the leather from my current manual seats. Quite easy actually.
You'll notice in these photo's i took that my father and i had to weld the top of the drivers seat frame.
So if you do find electric seats that have the dreaded twist, i would definately check that the metal at the top is not torn.
http://img114.imageshack.us/img114/7346/pic3lv3.jpg
http://img407.imageshack.us/img407/5920/pic2tx4.jpg
http://img124.imageshack.us/img124/771/pic1qx1.jpg
Last but not least i managed to aquire a auto dimming mirror. Thanks to some posts found on this wonderful site, we managed to wire it up correctly,and now have a fully functioning mirror.
Thats all from me for now.
Will hopefully be putting in tweeter panels this weekend and a few other bits and pieces.
:D