Derek A.
11-04-2006, 05:15 PM
1. Have some black 11" zip ties on hand to reattach the wiring harness
2. Lowes/Home Depot sells a 3/4" wide x 5/8 black adhesive foam tape. You will need some to reseal the blower motor compartment panel.
3. If you don't have a microfilter - take the time to clean the back side of the heater core. Mine was all gunked up with crap.
4. Don't forget the flimsy plastic cover like I did - cuz you got take a bunch of **** apart to put it in after you though you were done with the job !
2. Lowes/Home Depot sells a 3/4" wide x 5/8 black adhesive foam tape. You will need some to reseal the blower motor compartment panel.
3. If you don't have a microfilter - take the time to clean the back side of the heater core. Mine was all gunked up with crap.
4. Don't forget the flimsy plastic cover like I did - cuz you got take a bunch of **** apart to put it in after you though you were done with the job !