Michael999
11-20-2006, 03:21 AM
Ive decided to avoid purchasing new bmw heater valves and aux water pump due to the overpriced value of $400.
So im going aftermarket, so far ive got myself a 12v solenoid water valve for $30 ($170 for the bmw), and now have a few options for small marine water pumps but id like to get the flowrate as close to the original pump as i can.
The ones im looking at have a flowrate of about 3-4 litres per minute, and having a look at the piping size it seems that ill be refilling the heatercore with hot coolant every 15seconds.
Is this way too high, or is the stock unit a similar amount?
So im going aftermarket, so far ive got myself a 12v solenoid water valve for $30 ($170 for the bmw), and now have a few options for small marine water pumps but id like to get the flowrate as close to the original pump as i can.
The ones im looking at have a flowrate of about 3-4 litres per minute, and having a look at the piping size it seems that ill be refilling the heatercore with hot coolant every 15seconds.
Is this way too high, or is the stock unit a similar amount?