View Full Version : Bad 02 setting off knock sensor codes?
94530inh
11-26-2006, 08:52 AM
I had a bad 02 sensor code and bad knock sensors 2 and 4. Recently, the only code i can get is the o2 sensor code. Could my knock sensors be ok once I replace the o2 sensor? I bought the knock sensors and the o2 but if i dont have to take the engine apart I wont.
Thanks
winfred
11-26-2006, 09:37 AM
can't say i've ever seen it
BillionPa
11-26-2006, 09:45 AM
well, if your O2 sensor ran lean, it could raise temps enough causing knock, which i suspect would throw a knock sensor code.
winfred
11-26-2006, 10:00 AM
at which point the computer would back down the timing like it should, the knock sensors are constantly in play with the running they are not a occasional use part, it may not be hammering on them as hard now but they are probably still going bad
well, if your O2 sensor ran lean, it could raise temps enough causing knock, which i suspect would throw a knock sensor code.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.