PDA

View Full Version : Airbag Sensor Light



opivy15
12-05-2006, 09:08 PM
Airbag Sensor Light

--------------------------------------------------------------------------------

Does anyone know the key on flash sequence to determine air bag sensor light faults?

For example Fords have a key on sequence (Example: air bag light flashes 3 times signifys passenger sensor failure).

Blitzkrieg Bob
12-05-2006, 09:10 PM
It's been, if the SRS light comes on...it's a trip to the dealer.

stilljester
12-05-2006, 09:36 PM
Airbag Sensor Light

Does anyone know the key on flash sequence to determine air bag sensor light faults?

For example Fords have a key on sequence (Example: air bag light flashes 3 times signifys passenger sensor failure).

I've been searching on this for the past month on every BMW forum I can think of basically here's the summary of my searching.

There is no way to flash a code out via the SRS light. Since you have a 98 - You should be able to use the Peake tool to reset the light. Peake Reset Tool (http://www.peakeresearch.com/srstool.htm)

Your best bet:
With the battery disconnected clean all the SRS connectors - these are the orange connectors on top of the wheel well under the hood.
Reset the light
If the light returns - check the connections on the drivers side steering wheel - several people have posted the connection or clock spring under the bag becomes dirty and triggers the SRS light.
Reset the light.
If your still getting an SRS error its off to the dealer.

shogun
12-05-2006, 09:52 PM
The Peake tool for airbag reset does not work on older BMW such as the E34 and E32. Clearly mentioned.

That is why I import from Germany this airbag reset, oil and inspection tool
and it sells good in Japan on the auction house. Mostly indy repair shops buy them.
Fits for

3 series E30 1987~
3 series E36 1990~1999
3 series E46 2000~
5 series E34 1987~
5 series E39 1995~
7 series E32 1987~
7 series E38 1995~2001
X5 E53 2000~
Z3
Z8
http://img249.auctions.yahoo.co.jp/users/4/4/8/6/soundlabo77-img600x450-1164604351soundlabo77-img600x450-1153662975p1020078.jpg
http://page4.auctions.yahoo.co.jp/jp/auction/d67666612


And for more cars I sell this here
3 seriesE30,E36,E46
5 series E34,E39
7 series E32,E38
X3     E83
X5     E53
Z3     E36/7,E36/8
Z8     E52
Mini    2001~
Rover75 2001~
http://img247.auctions.yahoo.co.jp/users/4/4/8/6/soundlabo77-img600x450-1164737678airbag2.jpg

stilljester
12-05-2006, 09:56 PM
The Peake tool for airbag reset does not work on older BMW such as the E34 and E32. Clearly mentioned.

That is why I import from Germany this airbag reset, oil and instection tool
and it sells really good in Japan on the auction house. Mostly indy repair shops buy them.
Fits for

3 series E30 1987~
3 series E36 1990~1999
3 series E46 2000~
5 series E34 1987~
5 series E39 1995~
7 series E32 1987~
7 series E38 1995~2001
X5 E53 2000~
Z3
Z8
http://img249.auctions.yahoo.co.jp/users/4/4/8/6/soundlabo77-img600x450-1164604351soundlabo77-img600x450-1153662975p1020078.jpg
http://page4.auctions.yahoo.co.jp/jp/auction/d67666612


And for more cars I sell this here
3 seriesE30,E36,E46
5 series E34,E39
7 series E32,E38
X3     E83
X5     E53
Z3     E36/7,E36/8
Z8     E52
Mini    2001~
Rover75 2001~
http://img247.auctions.yahoo.co.jp/users/4/4/8/6/soundlabo77-img600x450-1164737678airbag2.jpg


Interested in importing another one?

saj3n
12-05-2006, 10:11 PM
make that another 2

shogun
12-05-2006, 10:15 PM
No thanks, I am happy with these products from Germany and they are known now.
I also have a Peake fault tool and a airbag reset tool but I found out too late that the Peake homepage says:

R5/SRS Features:

Models available for most BMWs built between 1994 and 2003

And Peake is more expensive.

Or do you mean you want to buy some of these?I have paid for the import duty and freight to Japan.
But you can buy it directly from Germany from this point
http://www.zymexx.de/english/frames.html

The smaller one is on the German page only, that one is enough for E32/34
Service Rücksteller BMW SIR3 digital
Rücksteller der Service-Intervallanzeige, Löschfunktion der Airbagkontrolleuchte, Rückstellung des Serviceintervalls der Airbagkontrolle und Bremsflüssigkeitsanzeige, Modelle 1987 bis 2003 ...
ausführliche Beschreibung
Preis inkl. MwSt. 49,00 Euro bestellen

That means 49 EURO for this

and the one with 2 connectors costs:

Boa digital
Reset Tool for BMW cars 1987 - 2003
Combination for round original BMW and OBD2 socket
Resets service, inspection and Airbag light.
detailed description
Price incl. VAT 129,00 Euro


Plus shipping.
When you order, pls mention my name 'shogun', and you will get a discount most probably, as I buy a lot from that company.

Just imported close to 20 sets to Japan and almost all are sold within 10 days.

stilljester
12-05-2006, 10:21 PM
No thanks, I am happy with these products from Germany and they are known now.
I also have a Peake fault tool and a airbag reset tool but I found out too late that the Peake homepage says:

R5/SRS Features:

Models available for most BMWs built between 1994 and 2003

And Peake is more expensive.


Well I appreciate your calling my attention to the tool - I have a 92 so this is exactly what I need. Unfortunately my Japanese is a bit rusty / nonexistent . Do you know of an English or European sources for the tool?

shogun
12-05-2006, 10:30 PM
Send an email to there, see my link, mention the name 'shogun" and see if you can get it cheaper than list price.
I know the owner Mr. Ernst J. Zymelka and will inform him today that some from this board will order.
But I think shipping to USA will be about 35 EURO = approx. 40 US $.
He accepts paypal.


Operating Instructions

SIR3 digital...
Reset device for the service interval display and airbag control lamp of
BMW-models 1987-2003

We accept no liability in case of damages suffered through the non-observance of the operating instructions, improper handling, improper use and external influences. The manufacturer is not liable either directly or indirectly for damage which may be caused by the use of this product. We grant 24 months manufacturer’s warranty for this product from date of purchase.

1. Field of Application

Microprocessor monitored, the SIR3 digital ……reset device resets the service interval display (in short SIA) in accordance with the stipulations of the vehicle manufacturer.
In addition, the airbag control lamp can be resetted in the combination instrument using the SIR3 digital…reset device.

2. Introduction

The digital BMW – service reset device communicates with the vehicle electronics. The resetter configures itself automatically to the respective technology of the vehicle.

3. Safety Instructions

When developing the SIR3 digital. reset device special attention was paid to safety operating and simplicity in use. The appliance is resistant to moisture, dirt, various oils and liquids as well as small mechanical jolts.

Never use sharp, pointed objects to press the buttons!

The BOA digital … reset device has left the plant in good working condition in terms of safety and function.
If it can be assumed that it is no longer possible to use the device safely then the appliance is to be put out of operation and sent to the manufacturer in suitable packaging for repair.

4. Resetting the service interval display

Once servicing work on the vehicle has been completed the SIA is to be reset according to the following procedure:

1. Switch on the ignition...
The resetter is first of all plugged into the 20-pole round BMW service socket located in the engine compartment.
2. The green LED flashes.
-> The appliance is automatically carrying out a self-test
3. The green LED is lit constantly
-> If the self-test revealed no faults, the SIR3 digital isready for operation.
4. Select reset operation Oilservice, Inspection or
For this press the respective buttom until the red LED lights up, then release the buttom.

The rest procedure is completed when the red LED goes out.

5. Remove resetter. Switch off ignition, and ON again.
6. Check whether the resetting processwas successfully carried out:

Warning ! do not start engine when resetter is plugged in.




5. Resetting the airbag control lamp

The SIR3 digital... deletes the error memory in the airbag control unit. The control lamp in the combination instrument goes out.

 Resetting procedure is as described under point 4 / Step 1-6
Resetting is actuated by pressing the buttom Airbag

The reset procedure is completed when the red LED goes out.

WARNING! If there is a safety-relevant fault in the airbag system, the airbag control lamp cannot be resetted, or it reappears when the engine is started again.
6. Error messages

1. Red LED flashes before any buttoms where pressed:
-> there is a fault in either the SIR3 or the vehicles data wiring.

2. Red LED flashes after an attempted resetting procedure:
-> communication problem with the vehicle.


7. Maintenance

The SIR3 digital... is absolutely maintenance free. You should however check from time to time the socket contact pins are in good conditions.

8. Technical Data

operating voltage 12 VDC current consumption 30mA
temperature range -10 / +40°C protection class IP67



9. Model Overview

The SIR3 digital reset device functions with all BMW vehicles with a round 20-pole BMW service socket up to year of construction 2003.
Not supported are models with reset via CAN-BUS I

3-series E30 1987 on
3-series E36 1990 - 1999
3-series E46 2000 on

5-series E34 1987 on
5-series E39 1995 on

7-series E32 1987 on
7-series E38 1995-2001

X5 E53 2000 on

Z3
Z8


Sedan, Touring, Convertible, Coupe , M-Tech

The list of models was compiled carefully. We assume no warranty regarding the completeness and accuracy of the contents.


We reserve the right to make technical changes.
©Copyright 2006 V1.0 SIR3BA-VS