Alpinewhite
12-14-2006, 12:15 PM
Is this the right procedure. I am skeptical about shorting + and -. And what is ignition position 2?
1. disconnect battery cables, first -, then +
2. turn ignition on position II
3. connect both battery cables ("short") for at least 10 minutes for drain of remaining power out of the system
4. ignition off
5. connect battery cables again to battery, first +, then -
Thanks
Arun
1. disconnect battery cables, first -, then +
2. turn ignition on position II
3. connect both battery cables ("short") for at least 10 minutes for drain of remaining power out of the system
4. ignition off
5. connect battery cables again to battery, first +, then -
Thanks
Arun