shogun
01-17-2007, 12:28 AM
Car spec.:
Daten für die Fahrgestell-Nr./VIN AM90320
type code/Typschlüssel: CB62
Katalysator: mit (with cat)
Lenkung: rechts/ right hand drive
Getriebe: automatisch/ automatic transmission
Baureihe: E36/3 series
Ausführung: Europa/ Europe version
model/Bezeichnung: 320i
Motor/engine type: M52
Karosserie/chassis type: Limousine
Produktionjahr/production year: 04/1995
Werk/manufactured in Munich: München
--------------------------------------------
Problem:
hi there, i am having problems with my e36 320iSE, 1995(m), it has the m50 vanos engine. when trying to start my car it just turns over, there was no noise coming from the petrol pump as it didnt sound as if it were priming. ran a live feed to it and it worked. i then checked the connections to the sender unit and the voltage was as it should be, i then checked the fuses, it wasnt blown so i took it out and checked the voltage for the connection. this is where it gets strange, there is no voltage coming to the fuse. we have checked various other connection but to no avail, like i say the car will turn over continuously without flooding. please help as i am stumped.
thanks
chris
----------------------------------
any recommendations?
fuel pump bridging? which pins?
wiring diagrams I have are these
http://www.gbnetwork.co.uk/bmw/downloadetm.html
Thanks
Daten für die Fahrgestell-Nr./VIN AM90320
type code/Typschlüssel: CB62
Katalysator: mit (with cat)
Lenkung: rechts/ right hand drive
Getriebe: automatisch/ automatic transmission
Baureihe: E36/3 series
Ausführung: Europa/ Europe version
model/Bezeichnung: 320i
Motor/engine type: M52
Karosserie/chassis type: Limousine
Produktionjahr/production year: 04/1995
Werk/manufactured in Munich: München
--------------------------------------------
Problem:
hi there, i am having problems with my e36 320iSE, 1995(m), it has the m50 vanos engine. when trying to start my car it just turns over, there was no noise coming from the petrol pump as it didnt sound as if it were priming. ran a live feed to it and it worked. i then checked the connections to the sender unit and the voltage was as it should be, i then checked the fuses, it wasnt blown so i took it out and checked the voltage for the connection. this is where it gets strange, there is no voltage coming to the fuse. we have checked various other connection but to no avail, like i say the car will turn over continuously without flooding. please help as i am stumped.
thanks
chris
----------------------------------
any recommendations?
fuel pump bridging? which pins?
wiring diagrams I have are these
http://www.gbnetwork.co.uk/bmw/downloadetm.html
Thanks