M50 formed fuel hoses

[etcetera]

I'm looking for the fuel hose/s at the ends of the fuel rail. Anyone sell the correct pieces or should I just use some fuel injection hose from the parts place?

I smell fuel occasionally and I've got fuel injector o-rings, pressure regulator o-rings, just need to get those hoses too and I'll do the whole job at once.

[Blitzkrieg Bob]

and new clamps wil do fine.

[etcetera]

That's what I'll do then.

Thanks

[JD525IA]

It sits near the back of the engine compartment? Right? I just had to replace mine last month when I worked on my starter. I had to buy a three foot piece of hose from the stealer. I had heard from someone on this forum that regular fuel hose was not strong enough because there was 30-40psi in the line.

Let me know if you need a hunk of it. Just cover the shipping cost. I've got about 2.5 ft left over. It is some very stong stuff, reinforced with chord. I just used some stainless steel hose clamps from work that were the same size to replace my old, crappy ones.

JD

[Blitzkrieg Bob]

you specify "Fuel Injection Hose" It's made for & rated to carry fuel under pressure.

[etcetera]

Thanks for the offer, but I already got some.