Any suugestions on adding Oil Press gauge on v8 m60???

[bimerguycw]

I want to add a 1/8-27 NPT gauge(non-Euro) for oil press and keep my OEM sender also but need suggestions on current oil distribution blocks that fit the v8 M60 oil filter housing.

I know BMP has one but I think it is for the M12 x1.5 threading only not 1/8 NPT.


Thanks.

[Blitzkrieg Bob]

installations by going to one of the banjo bolts by drilling and tapping the head to fit the sender or nipple/tube if it's mechanical..

[bimerguycw]

I may just omit the instrument sender and adapt from it's orig location since I will have the press gauge and the oil pan press./level sender always even with the instrument light sender removed....what do you think???

I would need to open or short the orig oil sender connection...I check bentley to see which would be better for the DME, if either.

[Blitzkrieg Bob]

adapter floating around for some applications that allowed both.

[95-540iLE]

Ihad a t adapter made so that I could run the original pressure sender as well as the oil temp gauge on the M5 cluster - works a treat.