disable break linings message on 93 525i?

[RIPDOTCOM]

I bought pads without the sensor and was wondering if I can simply tie the 2 wires coming from the sensor harness together to disable the message?

[632 Regal]

yes you can. the sensors are cheap, like under 2 dollars so it should be a thought. you wont have to remove anything more than the wheel to replace it. I would recommend picking up a few because they are fragle and break very easy when trying to install them.
I bought pads without the sensor and was wondering if I can simply tie the 2 wires coming from the sensor harness together to disable the message?

[JD525IA]

on the pads. It will save your rotors.

Also, why can't you just reuse the old sensor? I did.

JD

[RIPDOTCOM]

DAMN I twisted them together. and its still on. I only saw one on the drivers side front. are there anymore?

[632 Regal]

right rear tire. if it remains on track backwards through the fenderwell in front.

DAMN I twisted them together. and its still on. I only saw one on the drivers side front. are there anymore?

[Jon K]

Does anyone know where the brake pad sensors go from the wheels? Ie. I want to eliminate them under the hood rather than in the wheel well - don't want anything getting tangled! I did heavy stripping of **** this past week. :(