PDA

View Full Version : R134 Low pressure tap?



Boone.Msi
05-24-2007, 05:43 PM
First time charging the A/C, anyone have a pic of where to tap into the low pressure side, for a fill-up?

Ross
05-24-2007, 05:56 PM
No pic. On the pass side inner fender toward the firewall you will see the two refrigerant lines, the larger one is the low pressure side.

Tiger
05-24-2007, 06:28 PM
Ya... it is practically sticking up... easy access. High pressure are always much harder to access and way out of way to prevent people from hooking it up. In any case, low pressure fitting does not fit on the high pressure fitting.

Boone.Msi
05-24-2007, 06:32 PM
ok great, i noticed the two and didn't know if that was it or not, i may have to look but aren't they the same size?

Edit:
Just went out and took a look, there is indeed a larger pipe, the one closest to the firewall seems to be it...

Thanks guys!

Ross
05-24-2007, 06:44 PM
Nope, both are in a foam jacket, the lines are different size and like tiger says the fitting are also different.

Boone.Msi
05-24-2007, 06:45 PM
i edited my post thanks! ;)

mikeythekidd
05-25-2007, 08:18 AM
It's up nice and high on the right. Can't miss it. Spent an hour trying to locate on one of the kids Ford Focus recently. Finally found it in the freaking wheel well buried under the fender liner! No wonder Ford is going **** up!