View Full Version : Calling all engine techs
Kibokojoe
05-26-2007, 07:23 PM
I have noticed that when I first start my bimmer it has a miss. The miss will continue until the engine is really warmed up and I stop the car for 5 to 15 minutes and shut the engine off. If I get back into the car when it is still warm and start the engine there is no miss. Whats up with that?
winfred
05-26-2007, 07:25 PM
if the plugs wires and cap/rotor are old id change them and see where it stands
Kibokojoe
05-26-2007, 07:44 PM
Whats so special about Bimmer ignition wire that a set cost $200 big ones.
shogun
05-26-2007, 08:05 PM
Whats so special about Bimmer ignition wire that a set cost $200 big ones.
You ow me 50% of the savings :D
US $89.95
Tailor Resistor Wires [Manufacturer: BREMI (Germany) -
http://cgi.ebay.ca/Wire-Set-85-93-BMW-535-635-735_W0QQitemZ150112505700QQihZ005QQcategoryZ33692Q QtcZphotoQQcmdZViewItem
Kibokojoe
05-26-2007, 09:10 PM
Ha another Ebayer making up for a low price with shipping. At that price for shipping I should have them within a hour :-).
You ow me 50% of the savings :D
US $89.95
Tailor Resistor Wires [Manufacturer: BREMI (Germany) -
http://cgi.ebay.ca/Wire-Set-85-93-BMW-535-635-735_W0QQitemZ150112505700QQihZ005QQcategoryZ33692Q QtcZphotoQQcmdZViewItem
shogun
05-26-2007, 09:18 PM
Read it carefully.
The price of 37 $ is for shipping to GERMANY. I selected that cause someone in Germany asked for that. You have to switch to shipment within USA at the bottom, and that says
US $12.95 within U.S.
US Postal Service Priority MailŪ
2 to 3 business days*
Kibokojoe
05-26-2007, 09:34 PM
Cool
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.