PDA

View Full Version : Seafoam - which vacuum line to use?


repenttokyo
07-12-2007, 08:57 AM
Does anyone have a photo they could show me of which vacuum line to use in order to introduce seafoam into my intake? I have an M50.
yaofeng
07-12-2007, 09:24 AM
I think you can use this one under the intake. Unplug it from the FPR near the windshield. The picture is from a 93 m50tu I installed on my 95 two weeks ago.

http://i21.photobucket.com/albums/b274/yaofengchen/BMW_95_525i/DSC_4932-1.jpg

http://i21.photobucket.com/albums/b274/yaofengchen/BMW_95_525i/DSC_4936-1.jpg

http://i21.photobucket.com/albums/b274/yaofengchen/BMW_95_525i/DSC_4939-1.jpg
repenttokyo
07-12-2007, 02:44 PM
thank you!
bimmer95
07-14-2007, 10:37 PM
how about for the M60??
yaofeng
07-14-2007, 11:41 PM
how about for the M60??

Try here,
http://i21.photobucket.com/albums/b274/yaofengchen/BMW_95_540/DSC_2838-1.jpg
Jon K
07-15-2007, 01:24 AM
Repent - that your m50? is it a M50TU? what are the plans for it
GoldenOne
07-15-2007, 10:11 AM
can someone put an arrow to which line you are referring too?
repenttokyo
07-15-2007, 10:51 AM
Repent - that your m50? is it a M50TU? what are the plans for it


no, it's not mine - i think that's the engine yaofeng swapped into his son's car recently.
repenttokyo
04-29-2008, 01:53 AM
can someone put an arrow to which line you are referring too?


i would appreciate one too.
Phatty5BMW
04-29-2008, 11:01 PM
how about for the M60??

the m60 I did this before. Pull off the little vacuum line that goes right from under by the brake booster. It had a little inline fitting on it. Worked for me.
Sixdown
04-29-2008, 11:14 PM
I've used the brake booster hose for it in all of my cars. Even my M20 525e had it poured through the booster hose, and it worked. I assume you know how to use it properly?