PDA

View Full Version : question about rhino ramps



markus
07-18-2007, 05:13 PM
do they work with lowered cars or no? i want to do an oil change on the 540 this weekend.

Macv
07-18-2007, 06:24 PM
Yes, but your brake ducts will rub a tiny bit. Not enough to even leave a scrape, but enough to piss me off after just buying ramps.

If you want to save 40 bucks, just jack, place a stand for protection, open the cap, remove stand, and lower.

Not the greatest way, but it gets the job done :D

Rus
07-18-2007, 07:41 PM
Or get a couple of flat pieces of wood and drive up on them before driving onto the ramp itself. That will help avoid scraping ducts/aero work.

Macv
07-18-2007, 07:44 PM
^^^ good tip. Wish I had the experience to know these things.

Vanguard
07-18-2007, 09:38 PM
I've got poweramps from walmart. They work fine with the Eibachs. I could only find the rhino ramps locally in the 8000 lb version and wanted the 12000 lb. I think either would be fine.

632 Regal
07-19-2007, 03:04 PM
lol, i realized I needed to do that after lowering it.

^^^ good tip. Wish I had the experience to know these things.

Tiger
07-19-2007, 03:27 PM
Zero problem with Eibach springs. Not even with a rub. I got the black one... 12000 lb capacity. Either one will do you good... I'd just prefer the black one.