PDA

View Full Version : 535i windsheild washer jet nozzles


Kibokojoe
10-09-2007, 05:32 PM
Where can I get replacement 535i windsheild washer jet nozzles? Why do they heat these nozzles. I have never had a problem with nozzle that were not heated.
E34N
10-09-2007, 06:06 PM
AutohausAZ, pelican parts, BMA

I recently got mine from AutohausAZ
///Sniper535
10-09-2007, 07:28 PM
They are heated so that the nozzle don't freeze up with snow/ice and clog the opening in the winter
uscharalph
10-09-2007, 07:28 PM
They heat them for cold weather. No problem here in Southern California. LOL!!!
shogun
10-09-2007, 08:41 PM
Try to disassemble them. It did it. Put them in vinegar concentrate for a day, all stains gone, work fine again.
Kibokojoe
10-09-2007, 08:48 PM
I did that but now I can't figure out where this little metal disk goes it looks like it lies next to the heater but I don't know
shogun
10-09-2007, 09:06 PM
only have this pic
http://www.bmw7resource.co.uk/mkportal/modules/gallery/album/a_143.jpg
repenttokyo
10-09-2007, 09:08 PM
They are heated so that the nozzle don't freeze up with snow/ice and clog the opening in the winter


that almost never happens with non heated nozzles.
Kibokojoe
10-09-2007, 09:57 PM
In the picture the black block in the center if you use needle nose plyers the metal object in the center can be pulled out. I think I can see the metal disk sitting on the side of the metal object (I think this is the heater)
only have this pic
http://www.bmw7resource.co.uk/mkportal/modules/gallery/album/a_143.jpg
shogun
10-10-2007, 08:00 AM
found more info
http://www.the7seriesregister.co.uk/forums/index.php?showtopic=8425