View Full Version : I need new headlights - will these wire into my car?
repenttokyo
01-28-2008, 04:28 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=004&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=140200444982&rd=1
It says they take H4 bulbs? I have a NA spec 1991 525. Do I need any kind of adapters or will these plug right in?
repenttokyo
01-28-2008, 05:59 PM
are the adaptors easy to find? I assume it's a plug that plugs into my current headlight plugs, and then has an H4 plug at the end?
Adapters needed... or splicing.
repenttokyo
01-28-2008, 07:46 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=180210338050&rd=1 - These say they come with the necessary adapters - are they H1, H4 or NA bulbs? I can't get an answer out of the seller. They appear to be DEPO.
pgrindstaff
01-28-2008, 08:21 PM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=008&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=180210338050&rd=1 - These say they come with the necessary adapters - are they H1, H4 or NA bulbs? I can't get an answer out of the seller. They appear to be DEPO.
I have that set of lights on my car. The come with the necessary adapters and use H1 bulbs. From what I can tell they are built pretty well.
RallyD
01-28-2008, 09:18 PM
I had great luck using the bmwlight replacement lenses on my stock housings.
I considered the alternatives and I could easily refresh these again if they get pitted or cracked and still be in for less money. The best part was that I didn't have to mess with the adjusters. Just remove the assembly, bake in oven 200*, pry or smash glass lenses, remove old silicone, apply new silicone and new lens.
http://i60.photobucket.com/albums/h30/rallyd/IMG_1350.jpg
I also removed the reflector around the projector for an x-ray look with no adverse effects on the beam pattern.
gmannino
01-28-2008, 10:20 PM
Anyone ever have any melting issues with those plastic lens? How about you folks with HID's? I want to go with HID's in the near future and was thinking about going with the plastic lens from BMWlight but was unsure about any melting or discolorization.
repenttokyo
01-28-2008, 10:44 PM
thank you for all the answers guys.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.