vince
02-27-2008, 11:41 PM
My 1990 M20 525i (built 5/90) had an electrical fire in the passenger side low beam a few weeks ago while driving home through snow. I pulled over and extinguished the fire, but the wiring in front of the washer tank is fried (so were the heaqdlights, brackets and washer bottle, but those are easy). Car runs fine, but lights and wipers/washers are affected.
I found a replacement set of wires on a later M50 car in a junkyard, but there are a few wires that don't match up exactly. I've checked the wiring diagrams, and they really don't answer the questions as well as I'd like. They are:
From Car:
Brown w/violet
Black w/ yellow and red stripe
From New Harness:
Black w/white and yellow
I'm thinking that with a little checking the two black w/--- wires above will match up.
I have some brown w/black stripe wires; can I just connect any one to anyone, or do they have to match a certain item?
Same thing with two green/black wires. Can I just connect either one to either one?
Thanks,
vince
I found a replacement set of wires on a later M50 car in a junkyard, but there are a few wires that don't match up exactly. I've checked the wiring diagrams, and they really don't answer the questions as well as I'd like. They are:
From Car:
Brown w/violet
Black w/ yellow and red stripe
From New Harness:
Black w/white and yellow
I'm thinking that with a little checking the two black w/--- wires above will match up.
I have some brown w/black stripe wires; can I just connect any one to anyone, or do they have to match a certain item?
Same thing with two green/black wires. Can I just connect either one to either one?
Thanks,
vince