View Full Version : change your microfilter
winfred
05-26-2004, 09:08 PM
i just did the one on my 535, it was 2 years and 29k miles old
http://members.cox.net/wdixon27/microfilter
Tiger
05-26-2004, 10:54 PM
I don't know what is worse... filter or your fingers
winfred
05-26-2004, 11:06 PM
i worked on a diesel mercedes today, it'll take a week to douche it all off
I don't know what is worse... filter or your fingers
Bill R.
05-26-2004, 11:38 PM
I don't know what is worse... filter or your fingers
Hector
05-27-2004, 10:48 AM
'90 m30s have the microfilter. True? I've tried looking in my '90 m30 and haven't found one. I wish it had one as I'm susceptible to allergies.
Brian C.
05-27-2004, 10:50 AM
:p
rickm
05-27-2004, 10:53 AM
Better his nails than your nails. :D
Tiger
05-27-2004, 11:14 AM
Lol
winfred
05-27-2004, 12:40 PM
i installed the hvac system from a 92 525 when i rebuilt the car from the dash fire that sent it to my yard, i didn't want the sword style blower control, and the old style stereo so i grabbed a 92 525 and stripped it clean, i didn't have a digi cam back then so i don't have any pics, but my car was more taken apart then the pic of that 735 that was up here the other day.
'90 m30s have the microfilter. True? I've tried looking in my '90 m30 and haven't found one. I wish it had one as I'm susceptible to allergies.
Robin-535im
05-27-2004, 04:05 PM
'90 m30s have the microfilter. True? I've tried looking in my '90 m30 and haven't found one. I wish it had one as I'm susceptible to allergies.
Mine didn't have one either, just a bunch of crud smushed up against the heat exchanger...
Geoff Hoad
05-27-2004, 05:31 PM
OK, that proves it for once and for all. Bill R is NOT into latex... (gloves anyway! :)
You can put one in - there's a spot for it.
Sounds interesting! details please???
Sam :)
Robin-535im
05-28-2004, 12:08 PM
Sounds interesting! details please???
Sam :)
That the cars just came without the *filter* itself, the housing for the filter is still there. Basically there's a 1" gap behind the heater core and AC coldness-source where the filter goes. Buy a filter, clean out the muck and slide it in.
winfred
05-28-2004, 12:42 PM
i am right in the middle of doing a r134 convirsion on a 91 525 and when i pulled the evap out to check for oily spots i saw that it didn't have a filter but it does have a access door for it, and the evap was filthy from not having protection, so i am going back in with a filter after i finish cleaning the evap
Unregistered
05-28-2004, 01:29 PM
Lemme get this straight: My '90 535i did not come with a microfilter, but does have a place to put one, between the heater core and the AC heat exchanger. Correct?
What do filters cost at BMA?
When I did service II check on my '91 525ia I found no filter. Naturally I had one as part of getting ready tor the check and installed it. It's such a pita (make that learning experience) to work my way in that I couldn't imagine anyone doing that to remove the filter and not install one....
So I guess that explains it.
winfred
05-28-2004, 10:14 PM
it goes in from the glove box side and it's the closest thing in the hvac box to the firewall, infront of the evap, IF you can install a filter there will be a off white cover on the side of the box with a twist type latch on top and a torx screw on the bottom, take the glove box out, take the plastic above the glove box out, take the small carpet piece that has a + screw on the middle out, take the plastic to the left of the glove box out and take the floor vent duct out, all in that order, now you can access the microfilter (or it's spot)
Lemme get this straight: My '90 535i did not come with a microfilter, but does have a place to put one, between the heater core and the AC heat exchanger. Correct?
What do filters cost at BMA?
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.