Replace rear subframe mounting bushings the easy inexpensive way

[shogun]

http://www.bimmerboard.com/forums/posts/549901

[Bo525i]

Neat trick, thanks!

[whiskychaser]

Done them. But thats added to my favourites list for next time. And I'm sure the will be a next time:D

[Jeff325525]

Great write up! I did mine using a modified 2-arm harbor freight gear puller and a vice grips chain wrench to hold it together. I used a torch to warm the subframe which allows the old bushing to be removed easier. I use a piece of sheet metal as a heat shield. For the installing bolt use never seize on the threads. Also two washers with never seize on them makes turning the nut a little easier. I also put the new bushing in the freezer over night before install. Aerosol glass cleaner can also be used to lubricate the bushing easing installation.

Jeff

[e34.535i.sport]

Nice...