PDA

View Full Version : outer door handle gasket installation instructions



shogun
08-19-2008, 05:30 AM
That is a good one from the Japanese E34 DIY group.
http://dd.jpn.org/BMW_HP/20060508/index.shtml

If you need a set, see under
Swap Meet - Classified Ads :D

BigKriss
08-19-2008, 07:14 AM
Hi Erich. I think you have posted this a while ago. I've tried this a few times and I've had the gaskets for maybe one year now, but I could never get the old gaskets out, because I'm unable to do this stage

http://dd.jpn.org/BMW_HP/20060508/doornobgm_013.jpg

The trim outside the handle seems stuck :(

shogun
08-19-2008, 09:53 AM
Man, send me a flight ticket, I make that in 10 minutes.
Ask someone to push the handle towards the door metal sheet and you push the slider to the front direction. Then it opens.
I only have seen 2 weeks ago a problem in Brazil with the 750 E32 of eliasazem. He got a set from me and had a similar prolem. Finally turnd out that the door bracket was broken. Remove the door panel and check that from inside.

BigKriss
08-19-2008, 10:40 AM
Thanks, I'll get back to you.