The last dumb question of 2009 (from me anyhow :D )

[Bo525i]

Do I really need to drain all of the coolant to change the auxiliary fan temp switch or is it possible to do without? Crossing my lazy fingers here! :)

[bimmo_2007]

No, you don't need to drain it at all, I did mine last year without draining the coolant, however, a very small amount of coolant might spill off the hole while you are swapping the switches, you can check the level later.

[whiskychaser]

No, you don't need to drain it at all, I did mine last year without draining the coolant, however, a very small amount of coolant might spill off the hole while you are swapping the switches, you can check the level later.
+1
Its at the top of the rad (on mine at least) so I wouldnt drain any coolant off.

[Rick L]

No such thing as dumb questions, just dumb answers. ;)

^ +1

It is at the top and won't drain coolant when cold.

[Bo525i]

Awww guys, you make me feel all mooshy!


And btw.. Thanks! ;)

[mzarifkar]

make sure to bleed bleed bleed, and then bleed some more

[Tiger]

He might pass out from all that bleeding!

[bubba966]

make sure to bleed bleed bleed, and then bleed some more

He's got an M60, no bleeding required...:D

[bimmo_2007]

He's got an M60, no bleeding required...:D

I was just gonna say this :)

[bimmo_2007]

He might pass out from all that bleeding!

Hahahaha, that was a good one. lmao:D

[Bo525i]

Thank God that I dont have to bleed! :D

[Tiger]

Lol