Looking for part source...

[chinist]

for molded right angle 12mm vacuum hoses from throttle body to brake can (m20). All the usual part number searches return bulk hose in 1 meter lengths. There are some pretty tight bends to get a clean installation using straight hose.
Some one ear automotive crimp clamps would be nice also.

[Kibokojoe]

I think this is the part you are looking for

http://tinyurl.com/yatrf4l

13311288284 google this number and you will see an number of places to pick it up

pelican parts
Bavauto
www.eeuroparts.com

oh yes and
http://www.autohausaz.com

I like these guys $65 order and free shipping

[chinist]

It's more like this -http://bmwfans.info/parts/catalog/E34/Sedan/USA/525i-M20/LHD/A/1990/march/browse/engine/vacuum_control_engine

Item #3.....no matter what parts house I plug that part # into, I get bulk 12mm hose as a result.

Curiously, the part number you pointed out will work great on a Suzuki vs1400 tank to petcock hose I need, and a lot cheaper than OEM. Thanks
If you like Autohauz, check these guys out also http://www.rmeuropean.com/

[Bill R.]

Its going to be this part, its 12x19 not bulk.

[chinist]

I agree, 12x19.....ID x OD. And #34 33 1 115 926, although its not the one('s) I'm looking for would work as I could cannibalize to get the molded right angles I need for the input to that check valve coming from the throttle body. But once again , plug that part # into an actual parts source and you will get 12x19 bulk (length by meter) response. At least all that I normally use, autohauze, bma, KO performance, RMEuropean, etc.

[Kibokojoe]

Have you checked with the bimmerobbers? I have used them to determine if I am looking for the correct part and corresponding bmw # and then look else where if they are asking too much.

[M20Turbo]

Try http://www.bavauto.com/shop.asp enter the part# in the search area....