E34 Drag Link... anyone still have old one?

[Tiger]

I just need a ball joint boot for my Meyle drag link... I am wondeirng if anyone got an old one that is about to be thrown away... that you can take the boot off and send it to me... would be greatly appreciated.

Can't get the boot separately.

[632 Regal]

still need one? I can look around and see if i have anything decent.

[Tiger]

yeah I do... much appreciated.

[632 Regal]

I will go to the barn right now before I get side tracked.

[632 Regal]

No deals! Must have cleaned the place up or got robbed, not sure. If you want you can come help with the front end on the 850 and keep all the old stuff?

[Tiger]

I think you are too far away. but that's okay for not finding anything. I suppose I can run to my uncle's shop and see if I can find a similar unit.

[Ross]

I'm pretty sure Shogun(figures) came up with a source for new boots a while ago.
Perhaps he'll see the thread.

[632 Regal]

I think Ryan had a boot issue too, I'll see if I can get hold of him.

[ryan roopnarine]

what size boot is it from the drag link? tie rod or control arm sized, or is it something altogether different? bmp sells tie rod and control arm sized replacements here:

http://www.bmpdesign.com/category-exec/category_id/56/part_criteria%5Bsearch_year%5D/1992/part_criteria%5Bsearch_model%5D/48/

[tim eh?]

I think there is a good one left on the one I removed. The one from the centre link to the idler arm? Looks ok but is 20 years old I think... you want? How do I get it off without wrecking it?

[Tiger]

20 years old... nah... don't waste your time. On the newer boot, I think there is like a clip that holds the boot on. You probably took off a TRW one... which is bigger ball joint than Meyle.