PDA

View Full Version : A few pic's


Ferrett 1962
06-15-2011, 05:50 AM
I hope these can be seen I am not sure if I am doing this right
http://www.bimmernut.com/foruhttp://www.bimmernut.com/forum/images/attach/jpg.gifm/images/attach/jpg.gifhttp://www.bimmernut.com/forum/images/attach/jpg.gif
BigKriss
06-15-2011, 09:58 AM
nice mate, I havent seen an OBC like that before though.
Ferrett 1962
06-16-2011, 02:12 AM
The OBC is just the basic external temp and time with the alarm when the temp droped below 3 deg C but I have one comming from the US with all the functions
jeffheron
06-18-2011, 12:04 AM
Your 525 is in good shape love the interior comfortable to the eyes.
Ferrett 1962
06-18-2011, 04:14 AM
I think I was lucky I am only the third owner after the original owner sold it to his daughter and she traded it the only damage is to the bolster on the drivers side seat
jeffheron
06-18-2011, 05:46 AM
Not even visible! You got the good catch and most of all old is gold..
Paul in NZ
06-19-2011, 01:58 AM
looks really tidy!
Ferrett 1962
06-19-2011, 04:10 AM
It is a good car the only thing is with the lights on I get a message "tail light","licence plate, "Dip beam" although all are working ok so I will look into it when i get a chance.
BigKriss
06-22-2011, 05:57 AM
it could be the wiring in the boot
Ferrett 1962
06-22-2011, 07:44 AM
It looks like someone has been poking around the hinge where the wires go but I have thought of that and intend to go through it further. I have read here that is a problem area thanks
Ferrett 1962
06-22-2011, 07:54 AM
I have just recieved a full OBC from the states and will fit it tomorrow I have looked at the fitting and will need to cut the back of the mounting hole but I have pluged it in and it works, not bad for 29$AU from jackgor on ebay he had a few of these as well as switches from e34's not bad delivery time for budget shiping sold as is untested but all works and has many other little bits from other models
Ferrett 1962
06-24-2011, 10:59 AM
Well I have installed the new OBC and all seems to work ok but i will have to check if the settings are right does anyone know what country number is right for Australia plus I think it came out of a 535 so I am not sure what I need to change mine is a 525. I think the tank size is the same and I have looked at what I could find on the forums so I will just keep poking at it till I am happy