For anyone parting out your car.

[Abnormal]

I am looking for a heater valve. If you have one and are willing to sell, let me know.

[Rigmaster]

I am parting a couple of E34's right now- an '89 525i, a '90 535i and a '92 525i. Email me an offer or for more info. Let me know what you need and what you are willing to pay.

Other inquiries are welcome- I just recently moved after 16 years in the same house, so I may have missed some of your requests in the chaos.....

Thanks, Bret.

[Abnormal]

I am parting a couple of E34's right now- an '89 525i, a '90 535i and a '92 525i. Email me an offer or for more info. Let me know what you need and what you are willing to pay.

Other inquiries are welcome- I just recently moved after 16 years in the same house, so I may have missed some of your requests in the chaos.....

Thanks, Bret.

[525iT_Feen]

My dad has a 95 525iM

If the parts are the same then we are looking for a GOOD AC condenser, all four side markers(ours cracked), and the trunk mechanism/motor/parts (our's broke).

[Rigmaster]

Abnormal- I sent you a reply. Thanks!

Bret.

[Rigmaster]

The condensor in the '90 535i is good, not sure if it's the same as your '95 525i. The condensor in the '92 525i(M) should also be good. I do not have any nice sidemarkers- I think they are pretty cheap (~$12-15 ea) new. Not sure what you mean by "trunk mechanism/motor/parts".....do you mean the trunk lock actuator?? (the thing that locks/unlocks the trunk lock via the central locking??)...

Let me know. PM or email direct for fastest reply (and to save on bandwidth!).

Thanks, Bret.



My dad has a 95 525iM

If the parts are the same then we are looking for a GOOD AC condenser, all four side markers(ours cracked), and the trunk mechanism/motor/parts (our's broke).

[tnt525i]

I am parting a couple of E34's right now- an '89 525i, a '90 535i and a '92 525i. Email me an offer or for more info. Let me know what you need and what you are willing to pay.

Other inquiries are welcome- I just recently moved after 16 years in the same house, so I may have missed some of your requests in the chaos.....

Thanks, Bret.
hey rigmaster, i need a zf 5hp18 tranny if any of the cars you are parting out has one please let me know thanx

[Rigmaster]

Hi tnt, I have 2 tranny's left- the auto out of the '95 525i (4L30E???) and the auto out of the '89 525i (it's an M20 engine- so I think the tranny is a 4HP22 ??). Let me know if interested in either of these.

Thanks, Bret.

[george graves]

Interested in a e34 m30 motor -

[Rigmaster]

Sorry, the 535i motor is long gone- I'll let you know if I get another one soon. You also might want to try Al Taylor at "wabmw25@aol.com", I *think* he has 1.

Bret.

[1992 BMW 535i]

Have a gas tank in good shape?

[Mike M]

I am parting a couple of E34's right now- an '89 525i, a '90 535i and a '92 525i. Email me an offer or for more info. Let me know what you need and what you are willing to pay.

Other inquiries are welcome- I just recently moved after 16 years in the same house, so I may have missed some of your requests in the chaos.....

Thanks, Bret.


how much for the right rear fender out any of the cars? provided they are in great shape. i'm getting some rust by my gas task...

[Tony Bradley]

I am parting a couple of E34's right now- an '89 525i, a '90 535i and a '92 525i. Email me an offer or for more info. Let me know what you need and what you are willing to pay.

Other inquiries are welcome- I just recently moved after 16 years in the same house, so I may have missed some of your requests in the chaos.....

Thanks, Bret.

HI, Looking for a AUX FAN, the one that mounts in front of the Compressor.

Tony Bradley tbrad041462@aol.com

[Rigmaster]

I've got a couple of good fuel tanks (southern cars- no rust). $125 each. They are a bit big for shipping (not to mention that it's technically illegal- unless they are completely cleaned of all fuel residue). Let me know where you are located or if you think you could pickup from me in NC.

Thanks!
Bret

[Rigmaster]

They are in great shape- ~$125 would get you the whole right rear QTR panel. Delivery might be a problem due to size- where are you located??

Thanks, Bret.
Clayton,NC

[Rigmaster]

Got a good used one for $150- delivered to your door (within continental USA). Guaranteed to be in good working condition.

Thanks, Bret.

[Unregistered]

I've got a couple of good fuel tanks (southern cars- no rust). $125 each. They are a bit big for shipping (not to mention that it's technically illegal- unless they are completely cleaned of all fuel residue). Let me know where you are located or if you think you could pickup from me in NC.

Thanks!
Bret

Bret, I'm in Montreal (Quebec, Canada) where they want $360 US for each. If you can find a way to get it to me, I'll take one for sure.

[1992 BMW 535i]

Sorry, that's me above, forgot to log-in. I'm in Montreal in need of a tank

[Rigmaster]

Well, the NC coast is REALLY nice during summer, how about a vacation?? You could stop by my place on the way and pick up a nice load of parts to take home!!

Seriously, I do not know of any good way to ship this thing to Canada. It's too large for UPS, truck line would be $$$, add duties and clearance fees (paid by you) into the equation, and it's not a huge savings over new price. I'm more than willing to box it up and ship it- if you find something feasible let me know.

Thanks, Bret

[Mike M]

They are in great shape- ~$125 would get you the whole right rear QTR panel. Delivery might be a problem due to size- where are you located??

Thanks, Bret.
Clayton,NC


palatine, il

zip code is 60067

gas door included?

[Rigmaster]

I have gas door, but you'll need a new plastic hinge (cheap at the dealer). At this price, you'll have to arrange shipping or come here and pick it up (it's simply too large to get an accurate quote until the shipping co. gets their hands on it, AND it would probably have to be crated to avoid damage. Let me know if I can help.

Thanks, Bret.

[tnt525i]

darn,,, they wont work,, my car has the 5 speed tranny, i think those you got are 4 speeds,, my car needs the 5hp18 unit, hey i also need a right outer low beam headlight (ellipsoid ) if you have any
thanx

[Mike M]

I have gas door, but you'll need a new plastic hinge (cheap at the dealer). At this price, you'll have to arrange shipping or come here and pick it up (it's simply too large to get an accurate quote until the shipping co. gets their hands on it, AND it would probably have to be crated to avoid damage. Let me know if I can help.

Thanks, Bret.


where are you? is it possible for you to get an estimate of shipping costs?

[1992 BMW 535i]

Well, the NC coast is REALLY nice during summer, how about a vacation?? You could stop by my place on the way and pick up a nice load of parts to take home!!

Seriously, I do not know of any good way to ship this thing to Canada. It's too large for UPS, truck line would be $$$, add duties and clearance fees (paid by you) into the equation, and it's not a huge savings over new price. I'm more than willing to box it up and ship it- if you find something feasible let me know.

Thanks, Bret

Bret, I've got a FED-EX number you can use. Box it and let me know how to pay you and away we go. New is $600 CDN up here, so as long as it is in good shape, I'm ready.

[Rigmaster]

Mike, I'm just outside of Raleigh, NC. If you can suggest a shipping company- I'll see about getting an estimate. The problem(s) we have were mentioned above- but it's just too large for UPS/Fedex or any of the "normal" shipping companies, AND it will likely have to be crated ($$$) to avoid being damaged in transit.

Thanks, Bret

ps- just as a really ROUGH estimate- I would guess it would cost at least $200-250 for crating + shipping